Delhi Legal Metrology (Enforcement) Amendment Rules

REGD. No. D. L.-33002/99 GOVERNMENT OF INDIA Delhi Gazette SG-DL-E-04082026-275194 EXTRAORDINARY PUBLISHED BY AUTHORITY No. 204] DELHI, WEDNESDAY, JULY 29, 2026/SHRAVAN 7, 1948 [N. C. T. D. No. 134 PART IV GOVERNMENT OF THE NATIONAL CAPITAL TERRITORY OF DELHI WEIGHTS AND MEASURES DEPARTMENT (DEPARTMENT OF LEGAL METROLOGY) NOTIFICATION Delhi, the 28th July, 2026 F.No.12(2)/W&M/Enforcement/2026/953.- Whereas the draft of the Delhi Legal Metrology (Enforcement) Amendment Rules, 2026, was published in the Delhi Gazette, Extraordinary, Part-IV, vide No. F. 12(2)/ W&M / Enforcement/2026/261-69 dated 08.05.2026 and in the 02 Hindi & 02 English Daily Newspapers on the 14th May 2026, as required under sub-section (4) of Section 53 read with clause (q) of section 2 of the Legal Metrology Act 2009, for inviting objections or suggestions from the persons/stakeholders likely to be affected thereby, within a period of thirty days from the date on which copies of the Gazette containing the said notification was made available to the public; And whereas, the said draft notification was made available to the public on 08th May 2026; And whereas, no objection/suggestion received in the said period with regard to the said draft notification; Now therefore, in exercise of the powers conferred by section 53 read with clause (q) of section 2 of the Legal Metrology Act 2009, the Lt. Governor of National Capital Territory of Delhi, in consultation with the Central Government, is pleased to make the following rules, namely; 1. Short title and commencement:- (1) These rules may be called the Delhi Legal Metrology (Enforcement) Amendment Rules, 2026. (2) They shall come into force on the date of their publication in the Official Gazette of Delhi. 2. Amendment of Rule 11:- In the Delhi Legal Metrology (Enforcement) Rules 2011 (hereinafter referred to as the said rules), for rule 11, the following rule shall be substituted, namely:- (11) Registration Certificate of manufacturer, repairer and dealer of weights and measures- (1) Every manufacturer or repairer of, or dealer in, weight or measure shall make an application for the issue of a registration certificate to the Controller or such other officer as may be authorized by him in this behalf, in the appropriate form set out in Schedule II-A. Such Registration Certificate shall be issued on self-declaration basis without any inspection prior to issue of the registration certificate. Provided that no registration certificate to repair shall be required by a manufacturer to repair any weight or measure manufactured by him and used in a State other than the State of manufacture of the same, but the manufacturer has to inform in advance the concerned legal metrology officer about the repairing: Provided further that a person who bonafide repairs any weight or measure owned or possessed by him shall not require a repairer's registration certificate. (2) Omitted. (3) Every registration certificate issued to a manufacturer, repairer or dealer shall be in the appropriate form set out in Schedule III. (4) Every registration certificate issued to a manufacturer, repairer, or dealer by the Controller or any officer authorised by him in this behalf, on payment of the fee specified in Schedule IV, shall remain valid unless it is suspended or cancelled by the Controller or any officer authorised by him in this behalf. (5) The fee payable for the alteration of a registration certificate or for the issue of a duplicate registration certificate shall be as specified in Schedule IV. (6) The Controller or such other officer as may be authorized by him in this behalf shall maintain a register of registration certificate of manufacturers, dealers and repairers in the form set out in Schedule V. (7) Every manufacturer/repairer/dealer, registered under the Act and these rules shall maintain such workshop/equipments/tools/registers, etc. as the case may be, as per the terms and conditions of the registration certificate. (8) Every repairer registered under the Act and these rules shall furnish a security deposit for each registration certificate to the Government as specified in schedule-VI. (9) Every registration certificate issued under the Act and these rules shall be displayed in a conspicuous place in the premises where the manufacturer, repairer and dealer registered carries on business. (10) A registration certificate issued under the Act and these rules shall not be saleable, transferable or inheritable. 3. Amendment of Rule 12:- In the said rules, for rule 12, the following rule shall be substituted, namely:— (12) Suspension and Cancellation of Registration Certificate — (1) The Controller or such other officer authorized by him on his behalf may, if he has any reasonable cause to believe that the holder of any registration certificate granted under the Act and these rules has made any statement in, or in relation to, any application for the issue, or continuance of the registration certificate, which is incorrect or false in any material particular or has contravened any provision of the Act or any rule or order made thereunder, suspend such registration certificate, pending the completion of any inquiry against the holder of such registration certificate: Provided that no such registration certificate shall be suspended unless the holder thereof has been given a reasonable opportunity of showing cause against the proposed action: Provided further that where the inquiry referred to in this sub-rule section is not completed within a period of three months from the date of suspension of a registration certificate, such suspension shall, on the expiry of the period aforesaid, stand vacated. (2) The Controller or such other officer authorized by him on his behalf may, if he is satisfied, after making such inquiry as he may think fit, that the holder of a registration certificate has made a false or incorrect statement of the nature referred to in sub- rule (1), or has contravened any law or order referred to in that sub-rule, cancel such registration certificate: Provided that no such registration certificate shall be cancelled unless the holder thereof has been given a reasonable opportunity of showing cause against the proposed action. (3) Every person whose registration certificate has been suspended shall, immediately after such suspension, stop functioning as such registered repairer and shall not resume business as such registered repairer until the order of such suspension has been, or stands, vacated. (4) Every registered repairer whose registration certificate has been suspended or cancelled shall, after such suspension or cancellation, as the case may be, surrender such registration certificate to the authority by which such registration certificate was issued. (5) Every registered repairer whose registration certificate has been cancelled shall, within a period of thirty days from the date of such cancellation, or within such further period, not exceeding three months from such date, as the Controller or such other officer authorized by him on his behalf may, on sufficient cause being shown, allow, dispose of the weights or measures which were in his possession, custody or control on the date of such cancellation and in the event of his failure to do so, the Controller or any other officer authorized by him, in writing, in this behalf, may seize and dispose of the same and distribute the proceeds thereof in such manner as may be prescribed. 4. Amendment of Rule 13 - In Rule 13, for the words "licensed under the Act and these rules", the words "registered under the Act and these rules” shall be substituted. 5. Consequential Amendments - Throughout the rules and the Schedules appended thereto, unless the context otherwise requires, the words “licence”, “licensed”, “licensee”, “licenced”, “licensing” and “renewal of licence” shall respectively be construed as and substituted by "Registration Certificate", "registered", "registrant", "registered", "registration" and "continuance of Registration Certificate", wherever they occur. 6. Amendment of Schedules. In the Schedule appended to the rules- (1) for Schedule II-A, the following Schedule shall be substituted, namely:— "Schedule II-A (as appended to these rules)"; (2) Schedule II-B shall be omitted; (3) for Schedule III, the following Schedule shall be substituted, namely:- "Schedule III (as appended to these rules)"; (4) for Schedule IV, the following Schedule shall be substituted, namely:- "Schedule IV (as appended to these rules)"; (5) for Schedule V, the following Schedule shall be substituted, namely:— "Schedule V (as appended to these rules)"; (6) for Schedule VI, the following Schedule shall be substituted, namely:- "Schedule VI (as appended to these rules)"; (7) for Schedule VII, the following Schedule shall be substituted, namely:- "Schedule VII (as appended to these rules)". 7. Notwithstanding anything contained in the said rules as amended by these rules, any licence issued prior to the commencement of these rules shall continue to remain valid till the expiry of the period specified therein and shall be deemed to be a registration certificate for the purpose of said rules, upon expiry of such period, the holder shall obtain Registration Certificate in accordance with the provisions of the said rules as amended by these rules. By order and in the name of the Lt. Governor of National Capital Territory of Delhi, PANKAJ KUMAR, IAS, Controller, Legal Metrology FOOT NOTE: Delhi Legal Metrology (Enforcement) Rules 2011 were published in Delhi Gazette on 31.03.2011 and last amended vide notification no. 25 (N.C.T.D.No. 434) dated 28.01.2026. SCHEDULE-II-A [See rule 11 (1)] Form - LM-1 [Application form for Registration Certificate as Manufacturer of weights & measures under the Legal Metrology Act, 2009] To, To be filled by the Applicant (1) (2) 1. Name of the manufacturing concern for which .................................................................... Registration Certificate is desired. 2. Complete address of the concern. Whether premises .................................................................... are owned/rented/taken on lease/leave licence, duly supported by documents. 3. Date of Establishment of workshop/factory. .................................................................... 4. Name (s) and address (s) along with their father's/ .................................................................... husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company 5. The date and current registration number of factory/ .................................................................... shop/establishment/ Municipal Trade licence. 6. Nature of manufacturing activities at present. .................................................................... 7. The type of weights and measures proposed to be .................................................................... manufactured viz : (i) Weights (ii) Measures (iii) Weighing Instruments (iv) Measuring Instruments with details in each case. 8. The number of persons employed/proposed to be employed .................................................................... (i) Skilled (ii) Semi-skilled (iii) Unskilled (iv) Specialist trained in the line 9. The monogram or trade mark intended to be imprinted on .................................................................... weights and measures to be manufactured. 10. Details of machinery, tools accessories, owned and .................................................................... used for manufacturing weights measures etc. 11. Details of foundry/workshop facilities arranged. .................................................................... Whether ownership, long term lease etc. 12. Facilities of steel casting and hardness testing of .................................................................... Vital parts etc or other means. 13. Availability of electric energy. .................................................................... 14. Details of loan received from Government or financial .................................................................... Institution. If so, give details. 15. Name of bankers, if any. .................................................................... 16. GST Number/Professional Tax registration Number/IT Number .................................................................... 17. Have you applied previously for a manufacturer's .................................................................... Registration Certificate? If so, when and with what results? 18. (a) Whether the item (s) proposed to be .................................................................... manufactured will be sold within the State or out side the state or both. (b) Details of Model Approval received .................................................................... from Government of India; To be certified by the applicant (s) Certified that I/We have read the Legal Metrology Act, 2009 and the Delhi Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We agree to deposit the Scheduled Registration Certificate fee with Government as soon as required to do so by the Registration Certificate Authority. All the information furnished above is true to the best of my/our knowledge. Place: ............................ Date: ............................ Signature and Designation To be filled in by Departmental Officer of the Government of National Capital Territory of Delhi Date of Receipt of Application: Serial Number of application: Remarks: Place: ............................ Date ............................ Signature and Designation of LMO/ZO Final Orders of Registration Certificate Authority Registration Certificate granted / refused: Registration Certificate Number: Place: ............................ Date: ............................ Signature and Designation SCHEDULE-II-A [See rule 11 (1)] Form LR-1 [Application for Registration Certificate as Repairer of Weights & Measures under the Legal Metrology Act, 2009] To, To be filled by the applicants 1 2 1. Name of the concern seeking the Registration Certificate. .................................................................... 2. Complete address of the workshop. .................................................................... 3. (a) Whether premises are owned/rented/taken. on .................................................................... lease dully supported by documents. (b) Date of establishment. .................................................................... 4. Name (s) and address (s) along with their father's/ .................................................................... husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company. 5. Number and date of shop/establishment/current .................................................................... Municipal Trade Licence. 6. GST/Professional Tax/IT Tax registration Number etc if any. .................................................................... 7. The type of weights and measures proposed to repaired. .................................................................... 8. Area in which you wish to operate. .................................................................... 9. Previous experience in the line. .................................................................... 10. Number of skilled staff employed or proposed to be .................................................................... employed: (i) Skilled (ii) Semi-skilled (iii) Unskilled (iv) Employees trained in the line 11. Details of machinery/tools/accessories available. .................................................................... 12. Availability of electric energy. .................................................................... 13. Have you sufficient stock of loan/test weights. etc.? .................................................................... Give details. 14. Have you applied previously for a repairer's .................................................................... registration certificate? If so, When and with what results? To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Delhi Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We agree to deposit the Scheduled Registration Certificate fees with Government as soon as required to do so by the Registration Certificate Authority. All the information furnished above is true to the best of my/our knowledge. Place: ............................ Date: ............................ Signature and Designation To be filled in by Departmental Officer of the Government of National Capital Territory of Delhi Date of Receipt of Application: Serial Number of Application: Remarks: Place: ............................ Date: ............................ Signature and Designation of LMO/ZO Final Orders of Registration Certificate Authority Registration certificate granted/refused: Registration certificate Number: Place: ............................ Date: ............................ Signature and Designation SCHEDULE-II-A [See rule 11 (1)] Form LD-1 [Application Form for Registration Certificate as Dealers in Weights & Measures under the Legal Metrology Act, 2009] To, To be filled by the applicant (1) (2) 1. Name of the establishment/shop/person seeking the .................................................................... registration certificate. 2. Complete address of the establishment etc. .................................................................... 3. Date of establishment. .................................................................... 4. Name (s) and address (s) of proprietors and / or partners .................................................................... and Managing Director (s) in the case of Limited company. 5. Number and date of Registration Number of current .................................................................... shop/establishment/Municipal Trade licence. 6. Categories of weights and measures sold/proposed .................................................................... to be sold at present. 7. Registration Number of GST/ Professional Tax/Income Tax .................................................................... 8. Do you intend to import weights, etc. from places .................................................................... outside the State/Country? If so indicate sources of supply. (Give details of manufacturer's trade mark/ monogram and his registration certificate number) and provide (a) Registration of Importer of Weights and Measures, if any .................................................................... (b) Approval of model imported into India by Central Government. .................................................................... 9. Have you applied previously for a dealer's .................................................................... registration certificate, either in this State or elsewhere ? If so give details? To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Delhi Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We agree to deposit the Scheduled Registration Certificate fees with Government as soon as required to do so by the Registration Certificate Authority. All the information furnished above is true to the best of my/our knowledge. Place: ............................ Date: ............................ Signature and Designation To be filled in by Departmental Officer of the Government of National Capital Territory of Delhi Date of Receipt of Application: Serial Number of Application: Remarks: Place: ............................ Date: ............................ Signature and Designation of LMO/ZO Final orders of Registration Certificate Authority Registration certificate granted/refused: Registration certificate Number: Place: ............................ Date: ............................ Signature and Designation SCHEDULE-III [See rule 11 (3)] Registration Certificate Forms FORM LM-3 Government of National Capital Territory of Delhi OFFICE OF THE CONTROLLER OF LEGAL METROLOGY (Registration Certificate to Manufacture, weights, measures, weighing or measuring instruments) Registration Certificate No....................................................................... Year ........................ 1- The Controller of Legal metrology hereby registers to ........................................ (Name and address of party or parties) to manufacture the following:- (Include details of the weights, measures, weighting instruments or measuring instruments that are registered to be manufactured by the party). 2- The registration certificate is valid for the party named above in respect of his workshop located at ................................................................................................................................................... 3- The manufacturer shall comply with the conditions noted below. If he fails to comply with anyone of these, his registration certificate is liable to be cancelled. 4- The trade mark monogram being used by the manufacturer is as under. ................................................................................................................................................... (Signature) Controller of legal Metrology (Seal) Government of National Capital Territory of Delhi Date ............................ Place ............................ Note: In the case of firm, its name with the names of all names of all persons having interest in the business should be given in paragraph 1 CONDITIONS OF REGISTRATION CERTIFICATE 1. The person in whose favour this registration certificate is issued shall. - (a) Comply with all the relevant provisions of the Act and Rules for the time being in force; (b) Not encourage or countenance any infringement of the provisions of the Act. or the Rules amended from time to time; (c) Exhibit this registration certificate in some conspicuous part of the premises to which it relates; (d) Comply with any general or special directions that may be given by the Controller of legal metrology; (e) Surrender the registration certificate in the event of closure of business and/ or cancellation of registration certificate; (f) Present the weights, measures, weighing or measuring instruments as the case may be manufactured and meant for use within the State, to the legal metrology officer for verification and stamping before sale; 2. Every condition prescribed after the issue of this registration certificate shall if notified in the Official Gazette, be binding on the persons to whom the registration certificate has been granted. SCHEDULE- III [See rule 11 (3)] Registration Certificate Forms FORM LR-3 GOVERNMENT OF NATIONAL CAPITAL TERRITORY OF DELHI OFFICE OF THE CONTROLLER OF LEGAL METROLOGY (REGISTRATION CERTIFICATE TO REPAIR WEIGHTS, MEASURES, WEIGHING INSTRUMENTS OR MEASURING INSTRUMENTS) Registration Certificate No ........................................................................ Year ........................ 1- The Controller of legal metrology hereby registers to ........................................ (Name and address of Party or Parties) to repair the following:- (Include details of the types of weights, measures, weighing instruments or measuring instruments that are registered to be repaired by the party) 2- The registration certificate is valid for the party named above in respect of his workshop located at ................................................................................................................................................... 3- The repairer shall comply with the conditions noted below. If he fails to comply with any one, his registration certificate is liable to be cancelled. 4- The party is registered to repair weights, measures, weighting and measuring instruments in the areas mentioned below – ................................................................................................................................................... (Signature) Controller of Legal Metrology (Seal) Government of National Capital Territory of Delhi Date ............................ Place ............................ Note: In the case of firm, its name with the names of all persons having any interest in the business should be given in paragraph (1). Conditions of Registration Certificate 1. The person in whose favour this Registration Certificate is issued shall. - (a) Comply with all the relevant provisions of the Act and Rules for the time being in force; (b) Not encourage or countenance any infringement of the provisions of the Act or the Rules for the time being in force; (c) Exhibit this Registration Certificate in some conspicuous part of the premises to which it relates; (d) Comply with any general or special directions that may be given by the Controller of legal metrology; (e) Surrender the Registration Certificate in the event of closure of business and/or cancellation of Registration Certificate; (f) (i) Present the weights, measures, weighing or measuring instruments as the case may be duly repaired to the legal metrology officer for under taking verification and stamping as specified in rule 14(1), before delivery to the user. (ii) In the case of weights, measures weighing or measuring instruments, if they are serviced/repaired before the date on which the verification falls due and where, in the process and the verification stamp of the legal metrology officer is defaced, removed or broken, they shall be presented duly repaired to the legal metrology officer for re-verification and stamping before delivery to the user. 2. Every condition prescribed after the issue of this Registration Certificate shall, if notified in the Official Gazette, be binding on the persons to whom the Registration Certificate has been granted." SCHEDULE- III [See rule 11 (3)] Registration Certificate Form FORM - LD-3 GOVERNMENT OF NATIONAL CAPITAL TERRITORY OF DELHI Office of the Controller of legal metrology (Registration Certificate to a dealer in weights, measures, weighing instruments or measuring instruments) Registration Certificate No. ........................................................................ Year ........................ 1- The Controller of legal metrology hereby registers to ........................................ (Name and address of party or parties) to deal in the following (Indicate details of the types weights and measures, weights, or measuring instruments that are registered to be dealt with by party) 2- The Registration Certificate is valid for the party named above in respect of his premises located at ................................................................................................................................................... 3- The dealer shall comply with the conditions noted below. If he fails to comply with any one of those his Registration Certificate is liable to be cancelled. (Signature) Controller of Legal Metrology (Seal) Government of National Capital Territory of Delhi Date ............................ Place ............................ Note: In the case of firm its name with the names of all persons having any interest in the business should be given in paragraph (1). CONDITIONS OF REGISTRATION CERTIFICATE 1. The person in whose favour this Registration Certificate is issued shall. - (a) Comply with all the relevant provisions of the Act and Rules for the time being in force; (b) Not encourage or countenance any infringement of the provisions of the Act or the Rules for the time being in force; (c) Exhibit this Registration Certificate in some conspicuous part of the premises to which it relates; (d) Comply with any general or special directions that may be given by the Controller of legal metrology; (e) Surrender the Registration Certificate in the event of closure of business and/or cancellation of Registration Certificate; (f) Not sell or offer, expose or possess for sale any non-standard weight or measure. 2. Every condition prescribed after the issue of this Registration Certificate shall, if notified in the Official Gazette, be binding on the persons to whom the Registration Certificate has been granted. SCHEDULE-IV [See rule - 11 (4) & (5)] GOVERNMENT OF NATIONAL CAPITAL TERRITORY OF DELHI Office of Controller of Legal Metrology (Registration Certificate fees for manufacturers, repairers of dealers of weights and measures) 1. Issue of Registration Certificate: (i) Manufacturers Rs. 5000/- (Five thousand rupees) (ii) Repairers Rs. 2000/- (Two thousand rupees) (iii) Dealers Rs. 2000/- (Two thousand rupees) 2. Alteration of Registration Certificate: Rs. 1000/- (One thousand rupees) 3. Issue of duplicate Registration Certificate: Rs. 500/- (Five hundred rupees) SCHEDULE-V [See rule 11 (6)] GOVERNMENT OF NATIONAL CAPITAL TERRITORY OF DELHI Office of Controller of Legal Metrology Register of Registered Manufacturers/ Repairers/ Dealers of weights, measures, weighing / measuring instruments +----+-------------+------------------------------------------------+--------------------------------------+---------------------------------+---------------------------+----------------------------------------------+------------------+----------------------------------+----------+ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | +====+=============+================================================+======================================+=================================+===========================+==============================================+==================+==================================+==========+ | Registration Certificate Number | Date of issue | Name and complete address of the manufacturer /repairer / dealer | Place where workshop/factory is situated | Articles to be manufactured/repaired/sold | Trade mark/monogram being used | Orders regarding cancellation of Registration Certificate | Result of appeal | Signature of competent authority | Remarks | +----+-------------+------------------------------------------------+--------------------------------------+---------------------------------+---------------------------+----------------------------------------------+------------------+----------------------------------+----------+ | | | | | | | | | | | +----+-------------+------------------------------------------------+--------------------------------------+---------------------------------+---------------------------+----------------------------------------------+------------------+----------------------------------+----------+ Note: Column (4) does not apply to dealers; column (6) does not apply to repairers and dealers. SCHEDULE-VI [See rule 11(8)] GOVERNMENT OF NATIONAL CAPITAL TERRITORY OF DELHI Office of Controller of Legal Metrology Security deposit to be made by Registered Repairer: Repairer of weights and measures including weighing and measuring instruments. Rs. 5000.00 (Five Thousand rupees) SCHEDULE - VII [See rule 13] Register to be maintained by the Manufacturers of weights and measurers. 1- Name and address of the manufacturer ............................................................................................ 2- Description of the weight or measure ............................................................................................. 3- (i) No. of the manufacturing Registration Certificate ........................................................................ (ii) Date on which the Registration Certificate was issued ............................................................. 4- Particulars of order, if any, suspending or revoking the Registration Certificate. .......................................................................................................... +------+-------+----------------------------------+-------------------------------------+-----------+---------------------------+-----------------------------------+-----------------------------+---------------------------+-----------------------------------+------------------+-----------------+-----------+ | S.No | Month | Unsold stock from previous month | Quantity manufactured during the month | Total 3+4 | Sold within the state | Sold within the state | Sold outside the state | Sold outside the state | Sold outside the state | Total sold (6+9) | Balance (5-11) | Remarks | | | | | | | No. of item sold | Dispatch voucher no. and date | Name of the state | No. of items sold | Dispatch voucher no. and date | | | | +======+=======+==================================+=====================================+===========+===========================+===================================+=============================+===========================+===================================+==================+=================+===========+ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | +------+-------+----------------------------------+-------------------------------------+-----------+---------------------------+-----------------------------------+-----------------------------+---------------------------+-----------------------------------+------------------+-----------------+-----------+ | | | | | | | | | | | | | | +------+-------+----------------------------------+-------------------------------------+-----------+---------------------------+-----------------------------------+-----------------------------+---------------------------+-----------------------------------+------------------+-----------------+-----------+ Schedule -VII [See rule 13] Form LR-4 Register to be maintained by the Repairer in respect of weights and Measures Name and address of the repairer .................................................................................................. Registration Certificate No........................................................................................................... Date of Registration .................................................................................................................... +--------+----------+-----------------------------------+----------------------------------------+------------------------------------------+------------------------------+---------------------------+--------------------+----------------------------+-----------+ | S. No. | Date | Name of the user from whom received | Items and their Nos. booked for repair | Receipt No. and date of issue to the user | Amount of repairing charges | Amount of verification fee | Total amount charged | Date of return to the user | Remarks | +========+==========+===================================+========================================+==========================================+==============================+===========================+====================+============================+===========+ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | +--------+----------+-----------------------------------+----------------------------------------+------------------------------------------+------------------------------+---------------------------+--------------------+----------------------------+-----------+ | | | | | | | | | | | +--------+----------+-----------------------------------+----------------------------------------+------------------------------------------+------------------------------+---------------------------+--------------------+----------------------------+-----------+ Schedule - VII [See rule 13] LD-4 Register to be maintained by dealer in weights and measures 1- Name and address of the dealer .............................................................................................. 2- Description of the weight or measure ....................................................................................... 3- (i) Dealer Registration Certificate No. .................................................................................... (ii) Date on which the Registration Certificate was issued ...................................................... 4- Particulars of order, if any suspending or Registration Certificate. ............................................... 5- Category of weight or measure ................................................................................................ (Category A or B) +--------+-------+----------------------------------+---------------------------------------------+----------------------------------------------+-----------------+---------------------------+-----------------------------------+---------------------------+-----------------------------------+-----------------------------+------------------+-----------------+-----------+ | Sr. No | Month | Unsold stock from the previous month | Brought from within the state during the month | Brought from outside the state during the month | Total (3+4+5) | Sold within the state | Sold within the state | Sold outside the state | Sold outside the state | Sold outside the state | Total sold (7+9) | Balance (6-12) | Remarks | | | | | | | | No. of items sold | Dispatch voucher no. and date | No. of items sold | Dispatch voucher no. and date | Name of the state | | | | +========+=======+==================================+=============================================+==============================================+=================+===========================+===================================+===========================+===================================+=============================+==================+=================+===========+ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | +--------+-------+----------------------------------+---------------------------------------------+----------------------------------------------+-----------------+---------------------------+-----------------------------------+---------------------------+-----------------------------------+-----------------------------+------------------+-----------------+-----------+ | | | | | | | | | | | | | | | +--------+-------+----------------------------------+---------------------------------------------+----------------------------------------------+-----------------+---------------------------+-----------------------------------+---------------------------+-----------------------------------+-----------------------------+------------------+-----------------+-----------+ Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054. SARVESH KUMAR SRIVASTAVA Date: 2006.08.04 23:30:33 +05:30