Full Text
6673 GI/202 3 (1) रजिस्ट्री सं. डी.एल.- 33004/99 REGD. No . D. L. -33004/99
EXTRAORDINARY
PART II —Section 3 —Sub-section ( ii)
PUBLISHED BY AUTHORITY
No. 4417] NEW DELHI, THURS DAY , OCTOBER 19, 2023/ ASVINA 27, 1945
CG-DL-E-21102023-249586
1 2
MINISTRY OF ELECTRONICS AND INFORMATION TECHNOLOGY
(IPHW Division)
NOTIFICATION
New Delhi, the 12th October , 2023
Subject: Amendment to Electronic Products Notification F.No.W -43/4/2019 -IPHW -MeitY dated 07.09.2020
w.r.t. Clause No. 4.12 (Servers) – reg.
S.O. 4591(E).— Electronic Products were notified vide Ministry of Electronics and Information Technology
(MeitY) Gazette Notification F.No.W -43/4/2019 -IPHW -MeitY dated 0 7.09.2020, in furtherance of the Department for
Promotion of Industry and Internal Trade (DPIIT) Public Procurement (Preference to Make in India) Order 2017 dated
15.06.2017, as amended by Orders dated 28.05.2018, 29.05.2019, 04.06.2020 and 16.09.2020.
2. In case of Servers, Clause 4.12 (B): Mechanism for calculation of local content is amended as under and will
be applicable with immediate effect:
Revised Mechanism for calculation of local content :
The domestic Bill of Material (BOM) of Server would b e the sum of the cost of main inputs as specified in
Column 1 of the following table, provided the inputs individually satisfy the value addition requirement specified in
Column 2 of the table. However, the weightage of total value of 'Add on Controller' s hall not exceed 3% of the total
BOM of the Server .
Main inputs in BOM/ stages for
manufacture of Server Value addition /local content required for the input to be classified
as domestic BOM
1 2
Server Board/ Mother Board and CPU(s)/
GPU(s) Domestic PCB Assembly* and testing from imported/ domestically
manufactured parts and components, including the value of
Semiconductors** and CPU(s)/ GPU(s)** and excluding the value of
bare PCB.
Memory Module Domestic PCB Assembly* and testing from imported/ domestic ally
manufactured memory chips** and parts/ components on imported/
domestically manufactured bare PCB, excluding the value of bare PCB.
Hard Disk Drive/ Solid State Storage
Drive (SSD) Domestic assembly and testing from imported/ domestically
manufacture d parts and components.
Cabinet + SMPS Domestically manufactured Cabinet and domestic assembly and testing
of SMPS from imported / domestically manufactured parts and
components, subject to the condition that value of domestically
manufactured parts and c omponents used in the assembly of “SMPS”
will be minimum 25% (of the total value of parts and components used
in the manufacture of “SMPS”).
Bare PCB Domestically manufactured from imported/ domestically manufactured
inputs.
Accessories (Power Cables, Co nnectors,
etc.) Domestic assembly and testing from imported/ domestically
manufactured parts and components.
Add-on Controllers
i. RAID Controller/Adapter Domestic PCB Assembly* and testing from imported/ domestically
manufactur ed chips** and parts/ components on imported/ domestically
ii. Network Interface Controllers manufactured bare PCB, excluding the value of bare PCB.
(i) Final Assembly and Testing
(ii) Design and Development (i) Domestically assembled/ tested and
(ii) Intellectual Property (IP) reside nt in India for any of the above items.
The value of IP resident in India for any of the above items shall be
reduced from its value in the domestic BOM.
* It is essential that the Printed Circuit Board Assembly (PCBA) of the CPU(s)/ GPU(s)/ processor(s), parts/
components on the bare PCB using the SMT process should mandatorily be done in India
** This shall be reviewed when the Semiconductor FAB in India is operational.
3. All other terms and conditions of MeitY Gazette Notification F.No.W -43/4/2019 -IPHW -MeitY dated
07.09.2020 remain unchanged.
[F. No. W-43/4/2019 -IPHW -MeitY ]
ASHA NANGIA, Group Coordinator & Scientist 'G'
Uploaded by Dte. of Printing at Government of India Press, Ring R oad, Mayapuri, New Delhi -110064
and Published by the Controller of Publications, Delhi -110054.
Login to read full text