Full Text
REGD. No. D. L.-33004/99
The Gazette of India
CG-DL-E-13032026-270937
EXTRAORDINARY
PART II-Section 3-Sub-section (ii)
PUBLISHED BY AUTHORITY
No. 1272]
NEW DELHI, FRIDAY, MARCH 13, 2026/PHALGUNA 22, 1947
[F. N. 14/18/2024-ΑΕΙ(30044)]
Dr. HANIF QURESHI, Addl. Secy.
MINISTRY OF HEAVY INDUSTRIES
NOTIFICATION
New Delhi, the 13th March, 2026
S.O. 1331(E). - Amendment to PMP for N2 and N3 category of e-Trucks under the PM Electric Drive
Revolution in Innovative Vehicle Enhancement (PM E-DRIVE) Scheme
1. The PM Electric Drive Revolution in Innovative Vehicle Enhancement (PM E-DRIVE) Scheme was notified
by the Ministry of Heavy Industries vide S.O.4259(E) dated 29th September 2024. The Phased Manufacturing
Programme (PMP) for e-Trucks was notified by MHI vide S.O.3081 (E) dated 10th July 2025 and further amended by
S.O. 4481(E) on 30th September 2025.
2. Now Sr. No. 8,9 & 10 of the PMP of e-Trucks (N2/N3) is further amended as below with effect from date of its
publication in the Official Gazette:-
+--------+------------------------------------------+------------------------------------------------------------+------------------------------------------------------------+
| Sr. No.| PMP Component | N2 Category | N3 Category |
+========+==========================================+============================================================+============================================================+
| 8 | Traction Motor | With effect from 1st September 2026: | With effect from 1st September 2026: |
| | | Manufacturing of traction motor which at least | (In case of Traction Motor without Integrated |
| | | includes magnet fitment, fitment of rotor assembly | Transmission) |
| | | into motor, fitment of stator assembly into motor, | Manufacturing of traction motor which at least |
| | | shaft fitment, bearing fitment, enclosure fitment, | includes magnet fitment, fitment of rotor assembly |
| | | connectors fitment, cables fitment shall be | into motor, fitment of stator assembly into motor, |
| | | domestically performed. | shaft fitment, bearing fitment, enclosure fitment, |
| | | | connectors fitment, cables fitment shall be |
| | | | domestically performed. |
+--------+------------------------------------------+------------------------------------------------------------+------------------------------------------------------------+
| 9 | Traction Motor Integrated with | With effect from 1st September 2025: | With effect from 1st September 2025: |
| | Transmission (Wherever applicable) | Assembly of integrated Traction motor & transmission, | Assembly of integrated Traction motor & transmission, |
| | | Traction Motor controller, Transmission controller | Traction Motor controller, Transmission controller |
| | | and Software flashing shall be domestically performed. | and Software flashing shall be domestically performed. |
| | | Additionally with effect from 1st September 2026: | Additionally with effect from 1st September 2026: |
| | | (i) Manufacturing of Traction Motor & transmission | (i) Manufacturing of Traction Motor & transmission |
| | | which at least includes, magnet fitment, fitment | which at least includes, magnet fitment, fitment |
| | | of rotor assembly into motor, fitment of stator | of rotor assembly into motor, fitment of stator |
| | | assembly into motor, shaft fitment, bearing fitment, | assembly into motor, shaft fitment, bearing fitment, |
| | | enclosure fitment, connectors fitment, cables | enclosure fitment, connectors fitment, cables |
| | | fitment, transmission fitment, transmission | fitment, transmission fitment, transmission |
| | | controller fitment shall be domestically performed | controller fitment shall be domestically performed |
| | | and | and |
| | | (ii) Manufacturing of Traction Motor controller | (ii) Manufacturing of Traction Motor controller |
| | | including inverter which at least includes assembly | including inverter which at least includes assembly |
| | | of electronic components/semiconductors/ | of electronic components/semiconductors/ |
| | | connectors on the PCB, high voltage connectors | connectors on the PCB, high voltage connectors |
| | | fitment, cables fitment, heatsink fitment, | fitment, cables fitment, heat- sink fitment, |
| | | enclosure fitment, software/firmware flashing | enclosure fitment, software/firmware flashing |
| | | shall be domestically performed. | shall be domestically performed. |
+--------+------------------------------------------+------------------------------------------------------------+------------------------------------------------------------+
| 10 | Traction Motor controller including | With effect from 1st September 2025: | With effect from 1st September 2026: |
| | inverter | Manufacturing of Traction Motor controller including | (In case of Traction Motor without Integrated |
| | | inverter which at least includes integration of | Transmission) |
| | | assembled PCB (PCBA), high voltage connectors | Manufacturing of Traction Motor controller including |
| | | fitment, cables fitment, heat-sink fitment, | inverter which at least include assembly of |
| | | enclosure fitment, software/firmware flashing | electronic components/semiconductors/connectors |
| | | shall be domestically performed. | on the PCB, high voltage connectors fitment, cables |
| | | With effect from 1st September 2026: | fitment, heat- sink fitment, enclosure fitment, |
| | | Manufacturing of Traction Motor controller including | software/firmware flashing shall be |
| | | inverter which at least includes assembly of | domestically performed. |
| | | electronic components/semiconductors/connectors | |
| | | on the PCB, high voltage connectors fitment, cables | |
| | | fitment, heat- sink fitment, enclosure fitment, | |
| | | software/firmware flashing shall be domestically | |
| | | performed. | |
+--------+------------------------------------------+------------------------------------------------------------+------------------------------------------------------------+
[F. N. 14/18/2024-ΑΕΙ(30044)]
Dr. HANIF QURESHI, Addl. Secy.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.
Login to read full text