Full Text
REGD. No. D. L.-33004/99
The Gazette of India
CG-DL-E-31072024-255954
EXTRAORDINARY
PART III—Section 4
PUBLISHED BY AUTHORITY
No. 574]
NEW DELHI, WEDNESDAY, JULY 31, 2024/SHRAVANA 9, 1946
4737 GI/2024
(1)
THE GAZETTE OF INDIA : EXTRAORDINARY
[PART III-SEC.4]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 22nd July, 2024
Ref: HQ-PUB013/1/2020-PUB-BIS (967). In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| SI. | No., Year & Title of the Indian | Date of | No., Year & Title of the | Date of |
| No. | Standards Established | Establishment | Indian Standards to be | Withdrawal |
| | | | Withdrawn, if any | |
+=====+=======================================================+=====================+=======================================================+===================+
| (1) | (2) | (3) | (4) | (5) |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 1 | IS 2063 (Part 12): 2024 | 18 July 2024 | NA | NA |
| | ISO 230-12: 2022 | | | |
| | Machine Tools — Test Code | | | |
| | Part 12 Accuracy of Finished Test | | | |
| | Pieces | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 2 | IS 4518 (Part 3): 2024 | 18 July 2024 | NA | NA |
| | ISO 2453: 2020 | | | |
| | Styren-Butadiene Rubbers — Methods | | | |
| | of Test | | | |
| | Part 3 Determination of Bound Styrene | | | |
| | Content — Refractive Index Method | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 3 | IS 4908: 2024 | 18 July 2024 | IS 4908-1968 | 18 October 2024 |
| | Lac Industry — Glossary of Terms | | Glossary of Terms Used in Lac | |
| | (First Revision) | | Industry | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 4 | IS 5208: 2024 | 18 July 2024 | IS 5208 - 1969 | 18 August 2024 |
| | Acetic Acid — Code of Safety | | Code of Safety for Acetic Acid | |
| | (First Revision) | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 5 | IS 5914 (Part 9): 2024 | 18 July 2024 | IS 16254: 2014 | 18 August 2024 |
| | ISO 17232: 2017 | | ISO 17232: 2006 | |
| | Methods of Physical Testing of Leather | | Leather — Physical and | |
| | Part 9 Determination of Heat Resistance | | Mechanical Tests | |
| | of Patent Leather | | Determination of Heat | |
| | | | Resistance of Patent Leather | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 6 | IS 6213 (Part 22) : 2024 | 18 July 2024 | NA | NA |
| | ISO 3688: 2022 | | | |
| | Methods of Test for Pulp | | | |
| | Part 22 Preparation of Laboratory | | | |
| | Sheets for the Measurement of Optical | | | |
| | Properties | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 7 | IS 6270: 2024 | 18 July 2024 | IS 6270-1971 | 18 August 2024 |
| | Phenol — Code of Safety | | Code of Safety for Phenol | |
| | (First Revision) | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 8 | IS/ISO/TS 8000-60: 2017 | 18 July 2024 | NA | NA |
| | Data Quality | | | |
| | Part 60 Data Quality Management — | | | |
| | Overview | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 9 | IS 10285: 2024 | 18 July 2024 | IS 10285-1982 | 18 October 2024 |
| | Tannin Bearing Plants — Guidelines | | Guide for Tannin Bearing | |
| | (First Revision) | | Plants | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 10 | IS 13490: 2024 | 18 July 2024 | IS 13490: 1992 | 18 August 2024 |
| | Handling of Speciality Gases — Code | | Code of Practice for Handling | |
| | of Practice | | of Speciality Gases | |
| | (First Revision) | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 11 | IS 15092: 2024 | 18 July 2024 | IS 15092: 2002 | 18 August 2024 |
| | ISO 3286: 2016 | | ISO 3286: 1976 | |
| | Single Point Cutting Tools — Corner | | Single Point Cutting Tools — | |
| | Radii | | Corner Radii | |
| | (First Revision) | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 12 | IS 16478 (Part 1): 2024 | 18 July 2024 | IS 16478 (Part 1): 2019 | 18 August 2024 |
| | ISO 4386-1: 2019 | | ISO 4386-1: 2012 | |
| | Plain Bearings — Metallic Multilayer | | Plain Bearing — Metallic | |
| | Plain Bearings | | Multilayer Plain Bearings | |
| | Part 1 Non-Destructive Ultrasonic | | Part 1 Non-Destructive | |
| | Testing of Bond of Thickness Greater | | Ultrasonic Testing of Bond of | |
| | than or Equal to 0.5 mm | | Thickness Greater than or | |
| | (First Revision) | | Equal to 0.5 mm | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 13 | IS 18432 (Part 1) : 2024 | 18 July 2024 | IS 10719: 2015 | 18 August 2024 |
| | ISO 21920-1: 2021 | | ISO 1302: 2002 | |
| | Geometrical Product Specifications | | Geometrical Product | |
| | (GPS) — Surface Texture — Profile | | Specifications (GPS) | |
| | Part 1 Indication of Surface Texture | | Indication of Surface Texture in | |
| | | | Technical Product | |
| | | | Documentation | |
| | | | (First Revision) | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 14 | IS 18741: 2024 | 18 July 2024 | NA | NA |
| | Concrete Nails — Specification | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 15 | IS 18761: 2024 | 18 July 2024 | NA | NA |
| | ISO 15241: 2012 | | | |
| | Rolling Bearings — Symbols for | | | |
| | Physical Quantities | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
| 16 | IS 18763: 2024 | 18 July 2024 | NA | NA |
| | Determination of Shrinkage | | | |
| | Temperature of Leather (Over 100 °C) | | | |
+-----+-------------------------------------------------------+---------------------+-------------------------------------------------------+-------------------+
P. RAJESH, Scientist G & DDG (ITS, PRT & TNM)
[ADVT.-III/4/Exty./343/2024-25]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.
SARVESH KUMAR Digitally signed by SARVESH
SRIVASTAVA
KUMAR SRIVASTAVA
Login to read full text