Gazette Tracker
Gazette Tracker

Core Purpose

The Bureau of Indian Standards notifies the establishment of new Indian Standards in pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018.

Detailed Summary

The Bureau of Indian Standards, operating under the Department of Consumer Affairs, issued a notification on June 24, 2025 (Ref: HQ-PUB013/1/2020-PUB-BIS (1269)), in accordance with Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018. This notification announces the establishment of 23 new Indian Standards, all effective from June 23, 2025. For the first 12 standards listed in the schedule, older versions (e.g., IS 625: 2006, IS 7879 (Part 7) – 1984) will remain in concurrent force until their withdrawal on December 23, 2025. Notable established standards include IS 625: 2025 (Bicycles Handle Bar — Specification), IS 7879 (Part 7) & (Part 8): 2025 (Aeronautical and Astronautical — Glossary of Terms), IS 8169: 2025 (Air Cargo — Certified Lower Deck Containers - Design and Testing), IS 10854 (Part 1-5): 2025 (Cutter Suction Dredge Component Specification), IS 11903: 2025 (Aircraft Inner Tube and Tubeless Tyre Valves), IS 12545: 2025 (Aircraft Cargo Compartment Volumes), IS 14389: 2025 (Aircraft — Pallet Dolley), and several new 'Space Systems' standards (IS 19215: 2025 through IS 19302: 2025) which do not supersede previous Indian Standards. The notification was signed by Chitra Gupta, Scientist G & DDG (Hallmarking and Training).

Full Text

REGD. No. D. L.-33004/99 The Gazette of India CG-DL-E-30062025-264231 EXTRAORDINARY PART III—Section 4 PUBLISHED BY AUTHORITY No. 462] NEW DELHI, FRIDAY, JUNE 27, 2025/ASHADHA 6, 1947 BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 24th June, 2025 Ref: HQ-PUB013/1/2020-PUB-BIS (1269).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. THE SCHEDULE +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | SI | No., Year & Title of the Indian Standards Established | Date of Establishment | No., Year & Title of the Indian Standards to be Withdrawn, if any | Date of Withdrawal | | No. | | | | | +=====+================================================================================================================================+=======================+=============================================================================================================================================================+====================+ | (1) | (2) | (3) | (4) | (5) | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 1 | IS 625: 2025 | 23 June 2025 | IS 625: 2006 | 23 December | | | Bicycles Handle Bar — Specification | | Bicycle — Handle Bars — Specification | 2025 | | | (Fourth Revision) | | (Third Revision) | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 2 | IS 7879 (Part 7) : 2025 | 23 June 2025 | IS 7879 (Part 7) – 1984 | 23 December | | | Aeronautical and Astronautical — Glossary of Terms | | Glossary of Aeronautical and Astronautical Terms | 2025 | | | Part 7 Air Traffic and Ground Services | | Part 7 Air Traffic and Ground Services | | | | (First Revision) | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 3 | IS 7879 (Part 8) : 2025 | 23 June 2025 | IS 7879 (Part 8) – 1987 | 23 December | | | Aeronautical and Astronautical — Glossary of Terms | | Glossary of Aeronautical and Astronautical Terms | 2025 | | | Part 8 Power Plant | | Part 8 Power Plant | | | | (First Revision) | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 4 | IS 8169: 2025 | 23 June 2025 | IS 8169: 1997 | 23 December | | | ISO 6517: 2013 | | ISO 6517: 1992 | 2025 | | | Air Cargo — Certified Lower Deck Containers - Design and Testing | | Air Cargo Equipment - Base-Restrained Certified Containers | | | | (Second Revision) | | Exclusively for the Lower Deck | | | | | | of High-Capacity Air-Craft | | | | | | (First Revision) | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 5 | IS 10854 (Part 1): 2025 | 23 June 2025 | IS 10854 (Part 1) – 1984 | 23 December | | | Cutter Suction Dredge Component Specification | | Specification for Cutter Suction | 2025 | | | Part 1 Cutter | | Dredge Components | | | | (First Revision) | | Part 1 Cutter | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 6 | IS 10854 (Part 2): 2025 | 23 June 2025 | IS 10854 (Part 2) – 1984 | 23 December | | | Cutter Suction Dredge Component Specification | | Specification for Cutter Suction | 2025 | | | Part 2 Suction Pipe | | Dredge Components | | | | (First Revision) | | Part 2 Suction Pipe | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 7 | IS 10854 (Part 3): 2025 | 23 June 2025 | IS 10854 (Part 3) – 1984 | 23 December | | | Cutter Suction Dredge Component Specification | | Specification for Cutter Suction | 2025 | | | Part 3 Ladder | | Dredge Components | | | | (First Revision) | | Part 3 Ladder | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 8 | IS 10854 (Part 4) : 2025 | 23 June 2025 | IS 10854 (Part 4) – 1984 | 23 December | | | Cutter Suction Dredge Component — Specification | | Specification for Cutter Suction | 2025 | | | Part 4 Spud | | Dredge Components | | | | (First Revision) | | Part 4 Spuds | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 9 | IS 10854 (Part 5): 2025 | 23 June 2025 | IS 10854 (Part 5): 1993 | 23 December | | | Cutter Suction Dredge Component Specification | | Inland Vessels — Cutter Suction | 2025 | | | Part 5 Cast Spud Point | | Dredge Components | | | | (First Revision) | | Part 5 Cast Spud Point — General Requirements | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 10 | IS 11903: 2025 | 23 June 2025 | IS 11903-1986 | 23 December | | | ISO 9475: 1994 | | Specification for Caps for | 2025 | | | Aircraft Inner Tube and Tubeless | | Aircraft Tyre Tube Valves | | | | Tyre Valves — Cores and Caps — | | | | | | Methods of Test | | | | | | (First Revision) | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 11 | IS 12545: 2025 | 23 June 2025 | IS 12545: 1988 | 23 December | | | ISO 10046: 1996 | | Methodology of Calculating | 2025 | | | Aircraft Methodology of | | Aircraft Cargo Volumes | | | | Calculating Cargo Compartment Volumes | | | | | | (First Revision) | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 12 | IS 14389: 2025 | 23 June 2025 | IS 14389: 1996 | 23 December | | | Aircraft — Pallet Dolley — | | Aircraft — Pallet Dolley — | 2025 | | | Functional Requirements | | Functional Requirements | | | | (First Revision) | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 13 | IS 19215: 2025 | 23 June 2025 | NA | NA | | | ISO 16694: 2024 | | | | | | Space Systems — The Measured | | | | | | Parameters at Firing Bench and | | | | | | Flight Tests of Liquid Rocket | | | | | | Engines | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 14 | IS 19216: 2025 | 23 June 2025 | NA | NA | | | ISO 17540: 2016 | | | | | | Space Systems — Liquid Rocket | | | | | | Engines and Test Stands — Terms | | | | | | and Definitions | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 15 | IS 19217: 2025 | 23 June 2025 | NA | NA | | | ISO 19683: 2017 | | | | | | Space Systems — Design | | | | | | Qualification and Acceptance Tests | | | | | | of Small Spacecraft and Units | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 16 | IS 19224: 2025 | 23 June 2025 | NA | NA | | | ISO 10785: 2011 | | | | | | Space Systems — Bellows — | | | | | | Design and Operation | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 17 | IS 19258: 2025 | 23 June 2025 | NA | NA | | | ISO 15865: 2022 | | | | | | Space Systems — Qualification | | | | | | Assessment | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 18 | IS 19265: 2025 | 23 June 2025 | NA | NA | | | ISO 17546: 2024 | | | | | | Space Systems — Lithium Ion | | | | | | Battery for Space Vehicles — | | | | | | Design and Verification | | | | | | Requirements | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 19 | IS 19266: 2025 | 23 June 2025 | NA | NA | | | ISO/TR 11233: 2014 | | | | | | Space Systems — Orbit | | | | | | Determination and Estimation — | | | | | | Process for Describing Techniques | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 20 | IS 19271: 2025 | 23 June 2025 | NA | NA | | | ISO 14622: 2000 | | | | | | Space Systems — Structural | | | | | | Design — Loads and Induced | | | | | | Environment | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 21 | IS 19289: 2025 | 23 June 2025 | NA | NA | | | ISO 17666: 2016 | | | | | | Space Systems — Risk | | | | | | Management | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 22 | IS 19290: 2025 | 23 June 2025 | NA | NA | | | ISO 21349: 2023 | | | | | | Space Systems — Project Reviews | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ | 23 | IS 19302: 2025 | 23 June 2025 | NA | NA | | | ISO/TR 17400: 2021 | | | | | | Space Systems — Space Launch | | | | | | Complexes, Integration Sites and | | | | | | other Facilities — General Testing | | | | | | Guidelines | | | | +-----+--------------------------------------------------------------------------------------------------------------------------------+-----------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------+--------------------+ CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training) [ADVT. III/4/Extry./195/2025-26] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054. GORAKHA NATH YADAVA Digitally signed by GORAKHA NATH YADAVA Date: 2025.06.30 15:22:00 +05'30'

Never miss important gazettes

Create a free account to save gazettes, add notes, and get email alerts for keywords you care about.

Sign Up Free