Gazette Tracker
Gazette Tracker

Core Purpose

Bureau of Indian Standards notification establishing new Indian Standards and specifying the corresponding superseded standards for withdrawal.

Detailed Summary

Bureau of Indian Standards (Department of Consumer Affairs) Notification Ref. HQ-PUB013/1/2020-PUB-BIS(1069) dated 22 October 2024, issued under sub-rule (1) of Rule 15 of the Bureau of Indian Standards Rules, 2018, notifies that the listed Indian Standards were established on 14 October 2024, with the corresponding older standards remaining in force concurrently until their withdrawal on 14 April 2025. The Schedule (truncated before completion) includes: IS 975:2024 "Textiles -- Methods for Determination of Colour Fastness of Textile Materials to Sublimation" (Second Revision), replacing IS 975-1988; IS 2365:2024 "Steel Wire Ropes for Lifts -- Minimum Requirements" (Third Revision, aligned with ISO 4344:2022), replacing IS 2365:2018 (Steel Wire Suspension Ropes for Lifts, Elevators and Hoists); IS 3233:2024 "Safety and Relief Valves and Their Parts -- Glossary of Terms" (First Revision), replacing IS 3233-1965; IS 3745:2024 "Yoke Type Medical Cylinder Valve with Pin Index Connection" (Third Revision), replacing IS 3745:2006; IS 6594:2024 "Technical Supply Conditions for Steel Wire Ropes and Strands" (Fourth Revision), replacing IS 6594:2018; and IS 8776:2024 "Valve Fittings for Use with Liquefied Petroleum Gas (LPG)", replacing IS 8776-1988.

Full Text

REGD. No. D. L.-33004/99 The Gazette of India CG-DL-E-29102024-258315 EXTRAORDINARY PART III—Section 4 PUBLISHED BY AUTHORITY No. 874] NEW DELHI, TUESDAY, OCTOBER 29, 2024/KARTIΚΑ 7, 1946 BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 22nd October 2024 Ref: HQ-PUB013/1/2020-PUB-BIS (1069).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | SI | No., Year & Title of the Indian | Date of | No., Year & Title of the | Date of | | No. | Standards Established | Establishment | Indian Standards to be | Withdrawal | | | | | Withdrawn, if any | | +=====+=====================================================================================================================+====================+=====================================================================================================================================================================================================+==================+ | (1) | (2) | (3) | (4) | (5) | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 1 | IS 975: 2024 | 14 October 2024 | IS 975 - 1988 | 14 April 2025 | | | Textiles — Methods for | | Method for Determination of | | | | Determination of Colour Fastness of | | Colour Fastness of Textile | | | | Textile Materials to Sublimation | | Materials to Sublimation | | | | (Second Revision) | | (First Revision) | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 2 | IS 2365: 2024 | 14 October 2024 | IS 2365: 2018 | 14 April 2025 | | | ISO 4344: 2022 | | Steel Wire Suspension Ropes | | | | Steel Wire Ropes for Lifts — | | for Lifts, Elevators and Hoists | | | | Minimum Requirements | | Specification | | | | (Third Revision) | | (Second Revision) | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 3 | IS 3233: 2024 | 14 October 2024 | IS: 3233 - 1965 | 14 April 2025 | | | Safety and Relief Valves and Their | | Glossary of Terms for Safety | | | | Parts — Glossary of Terms | | and Relief Valves and Their | | | | (First Revision) | | Parts | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 4 | IS 3745: 2024 | 14 October 2024 | IS 3745: 2006 | 14 April 2025 | | | Yoke Type Medical Cylinder Valve | | Yoke Type Valve Connections | | | | with Pin Index Connection | | for Small Medical Gas | | | | (Third Revision) | | Cylinders — Specification | | | | | | (Second Revision) | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 5 | IS 6594: 2024 | 14 October 2024 | IS 6594: 2018 | 14 April 2025 | | | Technical Supply Conditions for | | Technical Supply Conditions | | | | Steel Wire Ropes and Strands | | for Steel Wire Ropes and | | | | (Fourth Revision) | | Strands | | | | | | (Third Revision) | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 6 | IS 8776: 2024 | 14 October 2024 | IS 8776 - 1988 | 14 April 2025 | | | Valve Fittings for Use with | | Specification for Valve | | | | Liquefied Petroleum Gas (LPG) | | Fittings for Use with Liquefied | | | | Cylinders up to and Including 13 | | Petroleum Gas (LPG) | | | | Litre Water Capacity — | | Cylinders up to and Including | | | | Specification | | 5-Litre Water Capacity | | | | (Second Revision) | | (First Revision) | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 7 | IS 12136: 2024 | 14 October 2024 | IS 12136 - 1987 | 14 April 2025 | | | Printing Machines — Classification | | Classification of Printing | | | | (First Revision) | | Machines | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 8 | IS 12682: 2024 | 14 October 2024 | IS 12682: 1989 | 14 April 2025 | | | Water Well Drilling — Percussion | | Water Well Drilling — | | | | Drilling Rigs — General | | Percussion Drilling Rigs — | | | | Requirements | | General Requirements | | | | (First Revision) | | | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 9 | IS 15029: 2024 | 14 October 2024 | IS 15029: 2001 | 14 April 2025 | | | Recovery Taps for Use with | | Recovery Taps for Use with | | | | Diamond Core Drilling | | Diamond Core Drilling | | | | Specification | | Requirements | | | | (First Revision) | | | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 10 | IS 16502 (Part 4/Sec 2): 2024 | 14 October 2024 | IS 16502 (Part 4/Sec 2) : 2021 | 14 April 2025 | | | IEC TS 61496-4-2: 2022 | | IEC TS 61496-4-2: 2014 | | | | Safety of Machinery — Electro- | | Safety of Machinery | | | | Sensitive Protective Equipment Part | | Electro-sensitive Protective | | | | 4 Particular Requirements for | | Equipment Part 4 Particular | | | | Equipment Using Vision Based | | Requirements for Equipment | | | | Protective Devices (VBPD) | | Using Vision Based Protective | | | | Section 2 Additional Requirements | | Devices (VBPD) | | | | When Using Reference Pattern | | Section 2 Additional | | | | Techniques (VBPDPP) | | requirements when using | | | | (First Revision) | | reference pattern techniques | | | | | | (VBPDPP) | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 11 | IS 18728: 2024 | 14 October 2024 | NA | NA | | | Multiple Split-System Air | | | | | | Conditioners and Air-to-Air Heat | | | | | | Pumps (VRF Air Conditioners) — | | | | | | Specification | | | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 12 | IS 18794: 2024 | 14 October 2024 | NA | NA | | | Air Handling Units — Specification | | | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 13 | IS 18932: 2024 | 14 October 2024 | NA | NA | | | Electronic Expansion Valve — | | | | | | Specification | | | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 14 | IS/IEC TS 60079-43: 2017 | 14 October 2024 | NA | NA | | | Explosive Atmospheres | | | | | | Part 43 Equipment in Adverse | | | | | | Service Conditions | | | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ | 15 | IS/IEC TS 60079-47: 2021 | 14 October 2024 | NA | NA | | | Explosive Atmospheres | | | | | | Part 47 Equipment Protection by 2- | | | | | | Wire Intrinsically Safe Ethernet | | | | | | Concept (2-WISE) | | | | +-----+---------------------------------------------------------------------------------------------------------------------+--------------------+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+ CHITRA GUPTA, Scientist G & DDG (Hallmarking) [ADVT.-III/4/Exty./644/2024-25] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054. AMIT KUMAR JAISWAL Digitally signed by AMIT KUMAR JAISWAL Date: 2024.10.29 22:00:50 +05'30'

Never miss important gazettes

Create a free account to save gazettes, add notes, and get email alerts for keywords you care about.

Sign Up Free