Quality Control Order for Polypropylene (PP) Materials for Moulding and Extrusion Amendment regarding.

8313 GI/202 4 (1) EXTRAORDINARY PART II —Section 3 —Sub-section ( ii) PUBLISHED BY AUTHORITY No. 5138 ] NEW DEL HI, TUESDAY , DECEMBER 24, 2024 /PAUSHA 3 , 194 6 CG-DL-E-24122024-259612 MINISTRY OF CHEMICALS AND FERTILIZERS (Department Of Chemicals And Petrochemicals) NOTIFICATION New Delhi, the 24th December, 2024 POLYPROPYLENE (PP) MATERIALS FOR MOULDING AND EXTRUSION (QUALITY CONTROL) THIRD AMENDMENT ORDER, 2024 S.O. 5553 (E). — In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, being of the opinion that it is necessary or expedient so to do in the public interest, after consulting the Bureau of Indian Standards, hereby makes the following Order further to amend the Polypropylene (PP) Materials for Moulding and Extrusion (Quality Control) Order, 2024, namely: - 1. (1) This order may be called the Polypropylene (PP) Materials for Moulding and Extrusion (Quality Control) Order Third Amendment Order, 2024. (2) It shall come into force on the date of its publication in the Official Gazette. 2. In the Polypropylene (PP) Materials for Moulding and Extrusion (Quality Control) Order, 2024 , in paragraph 1, for sub-paragraph (2), the following sub -paragraph shall be substituted, namely: — “(2) It shall come into force on the 24th day of June, 2025.” [F.No. PCT-59011/43/2024 -PC TECH. -CPC ] DEEPAK MISHRA, Jt. Secy . Note : The p rincipal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub -section (ii), vide notification number S.O. 921(E), dated the 26th February, 2024 and subsequently amended vide notification number S.O. 3594(E), dated 23rd August, 2024. Uploaded by Dte. of Printing at Government of India Press, Ring R oad, Mayapuri, New Delhi -110064 and Published by the Controller of Publications, Delhi -110054 .