In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given

REGD. No. D. L.-33004/99 The Gazette of India CG-DL-E-23072026-274743 EXTRAORDINARY PART III—Section 4 PUBLISHED BY AUTHORITY No. 455] NEW DELHI, WEDNESDAY, JULY 15, 2026/ASHADHA 24, 1948 BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 10th July, 2026 Ref: HQ-PUB013/1/2020-PUB-BIS (1572).— In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column.The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column SCHEDULE +-----+-------------------------------------------------------------------------------------------------------+---------------------+------------------------------------------------------------------------------------------------------+--------------------+ | SI | No., Year & Title of the Indian | Date of | No., Year & Title of the Indian | Date of | | No. | Standards Established | Establishment | Standards to be Withdrawn, if any | Withdrawal | +=====+=======================================================================================================+=====================+======================================================================================================+====================+ | (1) | (2) | (3) | (4) | (5) | +-----+-------------------------------------------------------------------------------------------------------+---------------------+------------------------------------------------------------------------------------------------------+--------------------+ | 1 | IS 7386: 2026 / ISO 8741: 2025 / Reverse-taper Grooved Pins - Half-length Progressive Grooves | 09 July 2026 | IS 7386: 2005 / ISO 8741: 1997 / Grooved Pins - Half-Length Reverse Taper Grooved (Second Revision) | 09 January 2027 | | | Specification (Third Revision) | | | | +-----+-------------------------------------------------------------------------------------------------------+---------------------+------------------------------------------------------------------------------------------------------+--------------------+ | 2 | IS/ISO 7425-2: 2021 / Hydraulic Fluid Power Cylinders Dimensions and Tolerances of Housings for | 09 July 2026 | IS/ISO 7425-2: 1989 / Hydraulic Fluid Power — Housings for Elastomer-Energized, Plastic-Faced Seals | 09 January 2027 | | | Elastomer Energized, Plastic-Faced Seals Part 2 Rod Seal Housings (First Revision) | | Dimensions and Tolerances Part 2 Rod Seal Housings | | +-----+-------------------------------------------------------------------------------------------------------+---------------------+------------------------------------------------------------------------------------------------------+--------------------+ | 3 | IS 12157: 2026 / Requirements for Construction of Work Platform of Powered Industrial Trucks | 09 July 2026 | IS 12157-1987 / Requirements for Construction of Work Platform of Powered Industrial Trucks | 09 January 2027 | | | (For Maintenance Purposes) (First Revision) | | (For Maintenance Purposes) | | +-----+-------------------------------------------------------------------------------------------------------+---------------------+------------------------------------------------------------------------------------------------------+--------------------+ | 4 | IS 16812: 2026 / ISO 14119: 2024 / Safety of Machinery — Interlocking Devices Associated with Guards | 09 July 2026 | IS 16812: 2018 / ISO 14119: 2013 / Safety of Machinery — Interlocking Devices Associated with Guards | 09 January 2027 | | | — Principles for Design and Selection (First Revision) | | — Principles for Design and Selection | | +-----+-------------------------------------------------------------------------------------------------------+---------------------+------------------------------------------------------------------------------------------------------+--------------------+ | 5 | IS 19592: 2026 / Gauge Block Comparator — Calibration | 09 July 2026 | NA | NA | +-----+-------------------------------------------------------------------------------------------------------+---------------------+------------------------------------------------------------------------------------------------------+--------------------+ | 6 | IS 19841: 2026 / Galvanizing Grade (GG) Zinc Alloy Ingots for Hot Dip Galvanizing of Steel — | 09 July 2026 | NA | NA | | | Specification | | | | +-----+-------------------------------------------------------------------------------------------------------+---------------------+------------------------------------------------------------------------------------------------------+--------------------+ S. K. VERMA, Scientist F & DDG (Hallmarking) [ADVT.-III/4/Exty./224/2026-27] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.