Bureau of Indian Standards

In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards

Issue Date: 18 July 2024 Published: 19 July 2024

Gazette ID: CG-DL-E-19072024-255564 Download PDF Official source ↗

Back to Feed

Cite this gazette

Core Purpose

Notification by the Bureau of Indian Standards establishing new or revised Indian Standards and specifying corresponding existing standards to be withdrawn, under Sub-rule (1) of Rule 15 of the Bureau of Indian Standards Rules, 2018.

Detailed Summary

The Bureau of Indian Standards (Department of Consumer Affairs), through Ref: HQ-PUB013/1/2020-PUB-BIS (947) dated 9th July 2024, notifies under Sub-rule (1) of Rule 15 of the Bureau of Indian Standards Rules, 2018 that a schedule of Indian Standards have been established effective 4 July 2024, including IS 3708 (Part 2): 2024 (Natural Rubber Latex - Methods of Test, Part 2 Determination of Sludge Content, Second Revision, replacing IS 3708 (Part 2)-1985/NRL:5, withdrawn 4 August 2024), IS 8000 (Part 2): 2024 (Geometrical Product Specifications - Geometrical Tolerancing, Third Revision, replacing IS 8000 (Part 2): 2019), IS/ISO/TS 8000-81: 2021 (Data Quality - Part 81 Data Quality Assessment - Profiling, new standard, no withdrawal), IS/ISO 8000-311: 2012 (Data Quality - Part 311 Application of Product Data Quality for Shape, new standard), IS 9316 (Part 2): 2024 (Rubber Latex - Methods of Test, Part 2 Determination of Viscosity, Second Revision, replacing IS 9316 (Part 2)-1987/RL:2), IS 16457: 2024 (Systems and Software Engineering - System Life Cycle Processes, Second Revision, replacing IS 16457: 2020), IS 16848 (Part 1/Sec 1): 2024 and IS 16848 (Part 1/Sec 2): 2024 (Rubber Methods of Test for Vulcanization Characteristics Using Curemeters, replacing IS 16848: 2018 and IS 11720 (Part 2): 2013 respectively), IS 16848 (Part 1/Sec 3): 2024 (Rotorless Curemeter, new standard), and further standards including IS 18257 (Part 4): 2024 listed in the schedule but cut off in the available text.

Full Text

REGD. No. D. L.-33004/99 The Gazette of India CG-DL-E-19072024-255564 EXTRAORDINARY PART III-Section 4 PUBLISHED BY AUTHORITY No. 539] NEW DELHI, THURSDAY, JULY 18, 2024/ASHADHA 27, 1946 4358 GI/2024 BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 9th July, 2024 Ref: HQ-PUB013/1/2020-PUB-BIS (947). In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | Sl.No. | No., Year & Title of the Indian Standards Established | Date of | No., Year & Title of the Indian Standards | Date of | | | | Establishment | to be Withdrawn, if any | Withdrawal | +=======+=============================================================+====================+=============================================================+====================+ | (1) | (2) | (3) | (4) | (5) | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 1 | IS 3708 (Part 2): 2024 | 04 July 2024 | IS 3708 (Part 2) - 1985 | 04 August 2024 | | | ISO 2005: 2014 | | Methods of Test for | | | | Natural Rubber Latex — Methods of | | Natural Rubber Latex | | | | Test | | Part 2 Determination of | | | | Part 2 Determination of Sludge Content | | Sludge Content | | | | (Second Revision) | | NRL: 5 | | | | | | (First Revision) | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 2 | IS 8000 (Part 2): 2024 | 04 July 2024 | IS 8000 (Part 2): 2019 | 04 August 2024 | | | ISO 2692: 2021 | | ISO 2692: 2014 | | | | Geometrical Product Specifications | | Geometrical Product | | | | (GPS) — Geometrical Tolerancing | | Specifications (GPS) — | | | | Part 2 Maximum Material Requirement | | Geometrical Tolerancing | | | | (MMR), Least Material Requirement | | Part 2 Maximum Material | | | | (LMR) and Reciprocity Requirement | | Requirement (MMR), | | | | (RPR) | | Least Material | | | | (Third Revision) | | Requirement (LMR) and | | | | | | Reciprocity Requirement | | | | | | (RPR) | | | | | | (Second Revision) | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 3 | IS/ISO/TS 8000-81: 2021 | 04 July 2024 | NA | NA | | | Data Quality | | | | | | Part 81 Data Quality Assessment — | | | | | | Profiling | | | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 4 | IS/ISO 8000-311: 2012 | 04 July 2024 | NA | NA | | | Data Quality | | | | | | Part 311 Application of Product Data | | | | | | Quality for Shape (PDQ-S) — | | | | | | Guidance | | | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 5 | IS 9316 (Part 2): 2024 | 04 July 2024 | IS 9316 (Part 2) - 1987 | 04 August 2024 | | | ISO 1652: 2011 | | Methods of Test for | | | | Rubber Latex — Methods of Test | | Rubber Latex | | | | Part 2 Determination of Viscosity | | Part 2 Determination of | | | | (Second Revision) | | Viscosity | | | | | | [RL: 2] | | | | | | (First Revision) | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 6 | IS 16457: 2024 | 04 July 2024 | IS 16457: 2020 | 04 August 2024 | | | ISO/IEC/IEEE 15288 : 2023 | | ISO/IEC/IEEE 15288 : | | | | | | 2015 | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | | Systems and Software Engineering — | | Systems and Software | | | | System Life Cycle Processes | | Engineering — System | | | | (Second Revision) | | Life Cycle Processes | | | | | | (First Revision) | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 7 | IS 16848 (Part 1/Sec 1): 2024 | 04 July 2024 | IS 16848: 2018 | 04 August 2024 | | | ISO 6502-1: 2018 | | ISO 6502: 2016 | | | | Rubber — Methods of Test | | Rubber — Guide to the | | | | Part 1 Measurement of Vulcanization | | Use of Curemeters | | | | Characteristics Using Curemeters | | | | | | Section 1 Introduction | | | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 8 | IS 16848 (Part 1/Sec 2): 2024 | 04 July 2024 | IS 11720 (Part 2): 2013 | 04 August 2024 | | | ISO 6502-2: 2018 | | ISO 3417: 2008 | | | | Rubber Methods of Test | | Methods of Test for | | | | Part 1 Measurement of Vulcanization | | Synthetic Rubber | | | | Characteristics Using Curemeters | | Part 2 Measurement of | | | | Section 2 Oscillating Disc Curemeter | | Vulcanization | | | | | | Characteristics with the | | | | | | Oscillating Disc | | | | | | Curemeter | | | | | | (Second Revision) | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 9 | IS 16848 (Part 1/Sec 3): 2024 | 04 July 2024 | NA | NA | | | ISO 6502-3: 2023 | | | | | | Rubber — Methods of Test | | | | | | Part 1 Measurement of Vulcanization | | | | | | Characteristics Using Curemeters | | | | | | Section 3 Rotorless Curemeter | | | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 10 | IS 18257 (Part 4): 2024 | 04 July 2024 | NA | NA | | | ISO 129-4: 2013 | | | | | | Technical Product Documentation | | | | | | (TPD) — Indication of Dimensions and | | | | | | Tolerances | | | | | | Part 4 Dimensioning of Shipbuilding | | | | | | Drawings | | | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 11 | IS/ISO/IEC TR 18268: 2013 | 04 July 2024 | NA | NA | | | Identification Cards — Contactless | | | | | | Integrated Circuit Cards - Proximity | | | | | | Cards — Multiple PICCs in a Single | | | | | | PCD Field | | | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 12 | IS 18491: 2024 | 04 July 2024 | NA | NA | | | ISO 12836: 2015 | | | | | | Dentistry — Digitizing Devices for | | | | | | CAD/CAM Systems for Indirect Dental | | | | | | Restorations — Test Methods for | | | | | | Assessing Accuracy | | | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 13 | IS 18743: 2024 | 04 July 2024 | NA | NA | | | ISO/IEC TR 9789: 1994 | | | | | | Information Technology — Guidelines | | | | | | for the Organization and Representation | | | | | | of Data Elements for Data Interchange | | | | | | — Coding Methods and Principles | | | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 14 | IS/ISO/IEC TS 20000-5: 2022 | 04 July 2024 | IS/ISO/IEC TR 20000-5: | 04 August 2024 | | | Information Technology — Service | | 2013 | | | | Management | | Information Technology — | | | | Part 5 Implementation Guidance for | | Service Management | | | | ISO/IEC 20000-1 | | Part 5 Exemplar | | | | (First Revision) | | Implementation Plan for | | | | | | IS/ISO/IEC TR 20000-1 | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ | 15 | IS/ISO/IEC/IEEE 42010: 2022 | 04 July 2024 | IS/ISO/IEC/IEEE 42010: | 04 August 2024 | | | Software, Systems and Enterprise — | | 2011 | | | | Architecture Description | | Systems and Software | | | | (First Revision) | | Engineering | | | | | | Architecture Description | | +-------+-------------------------------------------------------------+--------------------+-------------------------------------------------------------+--------------------+ P. RAJESH, Scientist G & DDG (ITS, PRT & TNM) [ADVT.-III/4/Exty./305/2024-25] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054. Digitally signed by SARVESH SARVESH KUMAR KUMAR SRIVASTAVA SRIVASTAVA Date: 2004.07.19 20:24:58 +0530

Never miss important gazettes

Create a free account to save gazettes, add notes, and get email alerts for keywords you care about.

Sign Up Free

Create free account to save & get alerts →