In pursuance of Sub rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies

REGD. No. D. L.-33004/99 The Gazette of India CG-DL-E-09042025-262372 EXTRAORDINARY PART III-Section 4 PUBLISHED BY AUTHORITY No. 282] NEW DELHI, MONDAY, APRIL 7, 2025/ CHAITRA 17, 1947 2397 GI/2025 BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 2nd April, 2025 Ref: HQ-PUB013/1/2020-PUB-BIS (1204)—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. THE SCHEDULE +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | SI | No., Year & Title of the Indian | Date of | No., Year & Title of the Indian | Date of | | No. | Standards Established | Establishment | Standards to be Withdrawn, if | Withdrawal | | | | | any | | +=====+=====================================================================================================================================================================================+==================+================================================================================================================================================================================================================================================================================================+=================+ | (1) | (2) | (3) | (4) | (5) | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 1 | IS 17123 (Part 7/Sec 1): 2025 | 27 March 2025 | NA | NA | | | IEC 61800-7-1: 2015 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 7 Generic Interface and Use of | | | | | | Profiles for Power Drive Systems | | | | | | Section 1 Interface Definition | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 2 | IS 17123 (Part 7/Sec 202): 2025 | 27 March 2025 | NA | NA | | | IEC 61800-7-202: 2015 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 7 Generic Interface and Use of | | | | | | Profiles for Power Drive Systems | | | | | | Section 202 Profile Type 2 — | | | | | | Specification | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 3 | IS 17123 (Part 7/Sec 203) : 2025 | 27 March 2025 | NA | NA | | | IEC 61800-7-203: 2015 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 7 Generic Interface and Use of | | | | | | Profiles for Power Drive Systems | | | | | | Section 203 Profile Type 3 — | | | | | | Specification | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 4 | IS 17123 (Part 7/Sec 204): 2025 | 27 March 2025 | NA | NA | | | IEC 61800-7-204: 2015 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 7 Generic Interface and Use of | | | | | | Profiles for Power Drive Systems | | | | | | Section 204 Profile Type 4 — | | | | | | Specification | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 5 | IS 17123 (Part 7/Sec 301): 2025 | 27 March 2025 | NA | NA | | | IEC 61800-7-301: 2015 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 7 Generic Interface and Use of | | | | | | Profiles for Power Drive Systems | | | | | | Section 301 Mapping of Profile | | | | | | Type 1 to Network Technologies | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 6 | IS 17123 (Part 7/Sec 302): 2025 | 27 March 2025 | NA | NA | | | IEC 61800-7-302: 2015 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 7 Generic Interface and Use of | | | | | | Profiles for Power Drive Systems | | | | | | Section 302 Mapping of Profile | | | | | | Type 2 to Network Technologies | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 7 | IS 17123 (Part 7/Sec 303): 2025 | 27 March 2025 | NA | NA | | | IEC 61800-7-303: 2015 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 7 Generic Interface and Use of | | | | | | Profiles for Power Drive Systems | | | | | | Section 303 Mapping of Profile | | | | | | Type 3 to Network Technologies | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 8 | IS 17123 (Part 7/Sec 304): 2025 | 27 March 2025 | NA | NA | | | IEC 61800-7-304: 2015 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 7 Generic Interface and Use of | | | | | | Profiles for Power Drive Systems | | | | | | Section 304 Mapping of Profile | | | | | | Type 4 to Network Technologies | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 9 | IS 17123 (Part 8) : 2025 | 27 March 2025 | NA | NA | | | IEC TS 61800-8: 2010 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 8 Voltage at the Power Interface | | | | | | Specification | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 10 | IS 17123 (Part 9/Sec 1): 2025 | 27 March 2025 | NA | NA | | | IEC 61800-9-1: 2017 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 9 Ecodesign for Power Drive | | | | | | Systems Motor Starters Power | | | | | | Electronics and their Driven | | | | | | Applications | | | | | | Section 1 General Requirements for | | | | | | Setting Energy Efficiency Standards | | | | | | for Power Driven Equipment Using | | | | | | the Extended Product Approach EPA | | | | | | and Semi Analytic Model SAM | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 11 | IS 17123 (Part 9/Sec 2): 2025 | 27 March 2025 | NA | NA | | | IEC 61800-9-2: 2023 | | | | | | Adjustable Speed Electrical Power | | | | | | Drive Systems | | | | | | Part 9 Ecodesign for Motor Systems | | | | | | Section 2 Energy Efficiency | | | | | | Determination and Classification | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 12 | IS/IEC 60034-18-42: 2017 | 27 March 2025 | IS 15999 (Part 18/Sec 42): 2018 | 27 September | | | + AMD 1: 2020 CSV | | IEC 60034-18-42: 2008 | 2025 | | | Rotating Electrical Machines | | Rotating Electrical Machines | | | | Part 18 Partial Discharge Resistant | | Part 18 Qualification and | | | | Electrical Insulation Systems | | Acceptance Tests for Partial | | | | (Type II) Used in Rotating Electrical | | Discharge Resistant Electrical | | | | Machines Fed from Voltage | | Insulation Systems (Type II) | | | | Converters | | Section 42 Used in rotating | | | | Section 42 Qualification Tests | | electrical machines fed from | | | | | | voltage converters | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ | 13 | IS/IEC 60071-11 : 2022 | 27 March 2025 | NA | NA | | | Insulation Co-ordination | | | | | | Part 11 Definitions, Principles and | | | | | | Rules for HVDC System | | | | +-----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-----------------+ CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training) [ADVT.-III/4/Exty./15/2025-26] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054. GORAKHA NATH YADAVA Digitally signed by GORAKHA NATH YADAVA Date: 2025.04.09 15:28:30 +05'30'