Gazette Tracker
Gazette Tracker

Core Purpose

Notification of established Indian Standards and concurrent withdrawal of existing standards by the Bureau of Indian Standards.

Detailed Summary

The Bureau of Indian Standards, operating under the Department of Consumer Affairs, in pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, hereby notifies the establishment of new Indian Standards. The particulars of these established standards, including their number, year, and title, are provided in the second column of the annexed Schedule, with the date of establishment indicated in the third column (specifically, 30th April, 2025 for all listed standards). The notification further specifies that particulars of previous standards, if any, which are to be withdrawn, are given in the fourth column. These previous standards shall remain in force concurrently with the new standards until their withdrawal on the date indicated against them in the fifth column (specifically, 30th October, 2025 for all listed withdrawn standards). The notification is signed by CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training).

Full Text

REGD. No. D. L.-33004/99 The Gazette of India CG-DL-E-08052025-262977 EXTRAORDINARY PART III-Section 4 PUBLISHED BY AUTHORITY No. 352] NEW DELHI, TUESDAY, MAY 6, 2025/VAISAKHA 16, 1947 (Department of Consumer Affairs) Ref: HQ-PUB013/1/2020-PUB-BIS (1222). 3000 GI/2025 BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 30th April, 2025 Ref: HQ-PUB013/1/2020-PUB-BIS (1222). In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | SI | No., Year & Title of the Indian | Date of | No., Year & Title of the Indian | Date of | | No. | Standards Established | Establishment | Standards to be Withdrawn, if | Withdrawal | | | | | any | | +=====+===================================================+====================+====================================================+===================+ | (1) | (2) | (3) | (4) | (5) | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 1 | IS 21: 2025 | 30 April 2025 | IS 21-1992 | 30 October | | | Wrought Aluminium and | | Wrought Aluminium and | 2025 | | | Aluminium Alloys for Manufacture | | Aluminium Alloys for | | | | of Utensils — Specification | | Manufacture of Utensils — | | | | (Fifth Revision) | | Specification | | | | | | (Fourth Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 2 | IS 1364 (Part 6) : 2025 | 30 April 2025 | IS 1364 (Part 6) : 2018 | 30 October | | | ISO 4033 : 2023 | | ISO 4033: 2012 | 2025 | | | Hexagon Head Bolts, Screws | | Hexagon Head Bolts, Screws | | | | and Nuts of Product Grades A | | and Nuts of Product Grades A | | | | and B | | and B | | | | Part 6 Hexagon Nuts, Style 2 | | Part 6 Hexagon Nuts, Style 2 | | | | (Size Range M5 to M39) | | (First Revision) | | | | (Second Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 3 | IS 1501 (Part 1): 2025 | 30 April 2025 | IS 1501 (Part 1): 2020 | 30 October | | | ISO 6507-1: 2023 | | ISO 6507-1:2018 | 2025 | | | Metallic Materials — Vickers | | Metallic Materials — Vickers | | | | Hardness Test | | Hardness Test | | | | Part 1 Test Method | | Part 1 Test Method | | | | (Sixth Revision) | | (Fifth Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 4 | IS 1559 (Part 3): 2025 | 30 April 2025 | IS 1559 (Part III) – 1982 | 30 October | | | Methods of Chemical Analysis of | | Methods of Chemical Analysis | 2025 | | | Ferrosilicon | | of Ferrosilicon | | | | Part 3 Determination of Sulphur | | Part III Determination of | | | | (Second Revision) | | Sulphur | | | | | | (First Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 5 | IS 1586 (Part 2): 2025 | 30 April 2025 | IS 1586 (Part 2) : 2018 | 30 October | | | ISO 6508-2: 2023 | | ISO 6508-2: 2015 | 2025 | | | Metallic Materials — Rockwell | | Metallic Materials — Rockwell | | | | Hardness Test | | Hardness Test | | | | Part 2 Verification and Calibration | | Part 2 Verification and | | | | of Testing Machines and | | Calibration of Testing | | | | Indenters (Sixth Revision) | | Machines and Indenters | | | | | | (Fifth Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 6 | IS 1586 (Part 3): 2025 | 30 April 2025 | IS 1586 (Part 3): 2018 | 30 October | | | ISO 6508-3: 2023 | | ISO 6508-3: 2015 | 2025 | | | Metallic Materials — Rockwell | | Metallic Materials — Rockwell | | | | Hardness Test | | Hardness Test | | | | Part 3 Calibration of Reference | | Part 3 Calibration of Reference | | | | Blocks | | Blocks | | | | (Sixth Revision) | | (Fifth Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 7 | IS 1917 (Part 3): 2025 | 30 April 2025 | IS 1917 (Part 3): 1992 | 30 October | | | Chemical Analysis of Quartzite | | Chemical Analysis of Quartzite | 2025 | | | and High Silica Sand | | and High Silica Sand | | | | Part 3 Determination of Silica | | Part 3 Determination of Silica | | | | (Second Revision) | | (First Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 8 | IS 1921: 2025 | 30 April 2025 | IS 1921: 2005 | 30 October | | | Solder Wire — Solid and Flux | | Flux Cored Solder Wire — | 2025 | | | Cored — Specification | | Specification | | | | (Third Revision) | | (Second Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 9 | IS 2131: 2025 | 30 April 2025 | IS 2131-1981 | 30 October | | | Standard Penetration Test of Soil | | Method for Standard | 2025 | | | Method of Test | | Penetration Test for Soils | | | | (Second Revision) | | (First Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 10 | IS 2248: 2025 | 30 April 2025 | IS 2248: 1992 | 30 October | | | Clay Products for Buildings — | | Glossary of Terms Relating to | 2025 | | | Glossary of Terms | | Clay Products for Buildings | | | | (Third Revision) | | (Second Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 11 | IS 2518: 2025 | 30 April 2025 | IS 2518-1964 | 30 October | | | Textiles — Seaworthy Packaging | | Code for Seaworthy Packaging | 2025 | | | of Wool Hosiery Yarn and Goods | | of Wool Hosiery Yarn and | | | | — Code of Practice | | Goods | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 12 | IS 3086: 2025 | 30 April 2025 | IS 3086-1965 | 30 October | | | Textiles — Seaworthy Packaging | | Code for Seaworthy Packaging | 2025 | | | of Cotton Hosiery Yarn and | | of Cotton Hosiery Yarn and | | | | Goods — Code of Practice | | Goods | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 13 | IS 4027 (Part 3): 2025 | 30 April 2025 | IS 4027 (Part 3) – 1987 | 30 October | | | Methods for Chemical Analysis of | | Methods of Chemical Analysis | 2025 | | | Bronzes | | of Bronzes | | | | Part 3 Determination of | | Part 3 Determination of | | | | Phosphorus by Volumetric | | Phosphorus — Volumetric | | | | Method | | Method | | | | (Second Revision) | | (First Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 14 | IS 4027 (Part 5): 2025 | 30 April 2025 | IS 4027 (Part 5) – 1987 | 30 October | | | Methods for Chemical Analysis of | | Methods of Chemical Analysis | 2025 | | | Bronzes | | of Bronzes | | | | Part 5 Determination of Tin by | | Part 5 Determination of Tin- | | | | Iodimetric Method | | Iodimetric Method | | | | (Second Revision) | | (First Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 15 | IS 4027 (Part 7): 2025 | 30 April 2025 | IS 4027 (Part 7): 1990 | 30 October | | | Methods for Chemical Analysis of | | Methods of Chemical Analysis | 2025 | | | Bronzes | | of Bronzes | | | | Part 7 Determination of Antimony | | Part 7 Determination of | | | | by Rhodamine B | | Antimony by Rhodamine B | | | | Spectrophotometric Method | | Spectrophotometric Method | | | | (Second Revision) | | (First Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 16 | IS 4027 (Part 9) : 2025 | 30 April 2025 | IS 4027 (Part 9): 1991 | 30 October | | | Methods for Chemical Analysis of | | Methods of Chemical Analysis | 2025 | | | Bronzes | | of Bronzes | | | | Part 9 Determination of | | Part 9 Determination of | | | | Aluminium by Atomic Absorption | | Aluminium by Atomic | | | | Spectrometric Method | | Absorption Spectrometric | | | | (Second Revision) | | Method | | | | | | (First Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 17 | IS 6024 2025 | 30 April 2025 | IS 6024-1983 | 30 October | | | Guards for Harvesting Machines | | Specification for Guards for | 2025 | | | —Specification | | Harvesting Machines | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 18 | IS 6226 (Part 1): 2025 | 30 April 2025 | IS 6226 (Part 1): 1994 | 30 October | | | Recommendations of Apparatus | | Recommendations of | 2025 | | | for Chemical Analysis of Metals | | Apparatus for Chemical | | | | Part 1 Apparatus for | | Analysis of Metals | | | | Determination of Carbon by | | Part 1 Apparatus for | | | | Direct Combustion (Second | | Determination of Carbon by | | | | Revision) | | Direct Combustion | | | | | | (First Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 19 | IS 6751: 2025 | 30 April 2025 | IS 6751-1972 | 30 October | | | Aluminium Alloy Castings and | | Specification for Aluminium | 2025 | | | Strips for Bearings | | Alloy Castings and Strips for | | | | Specification (First Revision) | | Bearings | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 20 | IS 6932 (Part 1): 2025 | 30 April 2025 | IS 6932 (Part 1) – 1973 | 30 October | | | Building Limes - Method of Test | | Methods of Tests for Building | 2025 | | | Part 1 Determination of Insoluble | | Limes | | | | Residue in Dilute Acid and Alkali, | | Part 1 Determination of | | | | Loss on Ignition, Insoluble | | Insoluble Residue, Loss on | | | | Residue in Hydrochloric Acid, | | Ignition, Insoluble Matter, | | | | Silicon Dioxide, Ferric and | | Silicon Dioxide, Ferric and | | | | Aluminium Oxide, Calcium Oxide | | Aluminium Oxide, Calcium | | | | and Magnesium Oxide | | Oxide and Magnesium Oxide | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 21 | IS 6932 (Part 2): 2025 | 30 April 2025 | IS 6932 (Part II) – 1973 | 30 October | | | Building Limes Method of Test | | Methods of Tests for Building | 2025 | | | Part 2 Determination of Carbon | | Limes | | | | Dioxide Content | | Part II Determination of | | | | (First Revision) | | Carbon Dioxide Content | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 22 | IS 6932 (Part 3): 2025 | 30 April 2025 | IS 6932 (Part III) – 1973 | 30 October | | | Building Limes Method of Test | | Methods of Tests for Building | 2025 | | | Part 3 Determination of Residue | | Limes | | | | on Slaking of Quicklime | | Part III Determination of | | | | (First Revision) | | Residue on Slaking of | | | | | | Quicklime | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 23 | IS 6932 (Part 4): 2025 | 30 April 2025 | IS 6932 (Part IV) – 1973 | 30 October | | | Building Limes Method of Test | | Methods of Tests for Building | 2025 | | | Part 4 Determination of Fineness | | Limes | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | | of Hydrated Lime | | Part IV Determination of | | | | (First Revision) | | Fineness of Hydrated Lime | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 24 | IS 6932 (Part 5) : 2025 | 30 April 2025 | IS 6932 (Part V) – 1973 | 30 October | | | Building Limes - Method of Test | | Methods of Tests for Building | 2025 | | | Part 5 Determination of | | Limes | | | | Unhydrated Oxide | | Part V Determination of | | | | (First Revision) | | Unhydrated Oxide | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 25 | IS 6932 (Part 6) : 2025 | 30 April 2025 | IS 6932 (Part VI) – 1973 | 30 October | | | Building Limes - Method of Test | | Methods of Tests for Building | 2025 | | | Part 6 Determination of Volume | | Limes | | | | Yield of Quicklime | | Part VI Determination of | | | | (First Revision) | | Volume Yield of Quicklime | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 26 | IS 6932 (Part 7) : 2025 | 30 April 2025 | IS 6932 (Part VII) – 1973 | 30 October | | | Building Limes Method of Test | | Methods of Tests for Building | 2025 | | | Part 7 Determination of | | Limes | | | | Compressive and Transverse | | Part VII Determination of | | | | Strengths | | Compressive and Transverse | | | | (First Revision) | | Strengths | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 27 | IS 6932 (Part 8) : 2025 | 30 April 2025 | IS 6932 (Part VIII) – 1973 | 30 October | | | Building Limes - Method of Test | | Methods of Tests for Building | 2025 | | | Part 8 Determination of | | Limes | | | | Workability | | Part VIII Determination of | | | | (First Revision) | | Workability | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 28 | IS 6932 (Part 9) : 2025 | 30 April 2025 | IS 6932 (Part IX) – 1973 | 30 October | | | Building Limes - Method of Test | | Methods of Tests for Building | 2025 | | | Part 9 Determination of | | Limes | | | | Soundness | | Part IX Determination of | | | | (First Revision) | | Soundness | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 29 | IS 6932 (Part 10): 2025 | 30 April 2025 | IS 6932 (Part X) – 1973 | 30 October | | | Building Limes - Method of Test | | Methods of Tests for Building | 2025 | | | Part 10 Determination of Popping | | Limes | | | | and Pitting of Hydrated Lime | | Part X Determination of | | | | (First Revision) | | Popping and Pitting of | | | | | | Hydrated Lime | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 30 | IS 6932 (Part 11): 2025 | 30 April 2025 | IS 6932 (Part 11) – 1983 | 30 October | | | Building Limes Method of Test | | Methods of Tests for Building | 2025 | | | Part 11 Determination of Setting | | Limes | | | | Time of Hydrated Lime | | Part 11 Determination of | | | | (First Revision) | | Setting Time of Hydrated Lime | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 31 | IS 10054: 2025 | 30 April 2025 | IS 10054: 1996 | 30 October | | | Textiles — High Density | | Textiles — High Density | 2025 | | | Polyethylene (HDPE) | | Polyethylene (HDPE) | | | | Monofilament Mosquito Netting, | | Monofilament Mosquito | | | | Round Mesh -Specification | | Netting, Round Mesh — | | | | (Second Revision) | | Specification | | | | | | (First Revision) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 32 | IS 11033: 2025 | 30 April 2025 | IS 11033-1984 | 30 October | | | Ridger Type Animal Drawn | | Specification for Animal Drawn | 2025 | | | Potato Digger — Specification | | Potato Digger, Ridger Type | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 33 | IS 12182: 2025 | 30 April 2025 | IS 12182-1987 | 30 October | | | Determination of Effects of | | Guidelines for Determination of | 2025 | | | Sedimentation in Planning and | | Effects of Sedimentation in | | | | Performance of Reservoirs — | | Planning and Performance of | | | | Guidelines | | Reservoirs | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 34 | IS 12308 (Part 1): 2025 | 30 April 2025 | IS 12308 (Part 1) – 1987 | 30 October | | | Methods for Chemical Analysis of | | Methods for Chemical Analysis | 2025 | | | Cast Iron and Pig Iron | | of Cast Iron and Pig Iron | | | | Part 1 Determination of Total | | Part 1 Determination of Total | | | | Carbon by Thermal Conductivity | | Carbon by Thermal | | | | Method | | Conductivity Method | | | | (for Carbon 1.00 Percent to 4.50 | | (for Carbon 1.00 to 4.50 | | | | Percent) | | Percent) | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 35 | IS 12308 (Part 11): 2025 | 30 April 2025 | IS 12308 (Part 11): 1991 | 30 October | | | Methods for Chemical Analysis of | | Methods for Chemical Analysis | 2025 | | | Cast Iron and Pig Iron | | of Cast Iron and Pig Iron | | | | Part 11 Determination of Total | | Part 11 Determination of Total | | | | Carbon by the Direct Combustion | | Carbon by the Direct | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | | Volumetric Method | | Combustion Volumetric | | | | (for Carbon 1.50 Percent to 4.50 | | Method | | | | Percent) | | (for Carbon 1.50 to 4.50 | | | | (First Revision) | | Percent) | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 36 | IS 12308 (Part 12): 2025 | 30 April 2025 | IS 12308 (Part 12): 1992 | 30 October | | | Methods for Chemical Analysis of | | Methods of Chemical Analysis | 2025 | | | Cast Iron and Pig Iron | | of Cast Iron and Pig Iron | | | | Part 12 Determination of Copper | | Part 12 Determination of | | | | by Atomic Absorption | | Copper by Atomic Absorption | | | | Spectrometric Method | | Spectrometric Method | | | | (for Copper 0.01 Percent to 0.5 | | (for Copper 0.01 to 0.5 | | | | Percent) | | Percent) | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 37 | IS 12363: 2025 | 30 April 2025 | IS 12363-1988 | 30 October | | | Track Width of Agricultural | | Recommendation on Track | 2025 | | | Tractors — Recommendations | | Width of Agricultural Tractors | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 38 | IS 15629: 2025 | 30 April 2025 | IS 15629: 2005 | 30 October | | | ISO 7434: 2024 | | ISO 7434:1983 | 2025 | | | Fasteners — Slotted Set Screws | | Slotted Set Screws with Cone | | | | with Cone Point — Specification | | Point | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 39 | IS 15631: 2025 | 30 April 2025 | IS 15631: 2005 | 30 October | | | ISO 7436: 2024 | | ISO 7436: 1983 | 2025 | | | Fasteners — Slotted Set Screws | | Slotted Set Screws with Cup | | | | with Cup Point - Specification | | Point | | | | (First Revision) | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 40 | IS 17003 (Part 1) : 2025 | 30 April 2025 | IS 17003 (Part 1): 2022 | 30 October | | | ISO 80004-1: 2023 | | ISO/TS 80004-1: 2015 | 2025 | | | Nanotechnologies — Vocabulary | | Nanotechnologies — | | | | Part 1 Core Vocabulary | | Vocabulary | | | | (Second Revision) | | Part 1 Core Terms | | | | | | (First Revision) | | | | | | IS 17003 (Part 2): 2018 | | | | | | ISO/TS 80004-2: 2015 | | | | | | Nanotechnologies — | | | | | | Vocabulary | | | | | | Part 2 Nano-Objects | | | | | | IS/ISO/TS 80004-4: 2011 | | | | | | Nanotechnologies — | | | | | | Vocabulary | | | | | | Part 4 Nanostructured | | | | | | Materials | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 41 | IS 18471: 2025 | 30 April 2025 | IS 18471 (Part 1): 2023 | 30 October | | | Fasteners - Drilling Screws with | | ISO 15481:1999 | 2025 | | | Tapping Screw Thread | | Fasteners — Cross Recessed | | | | Specification | | Drilling Screws with Tapping | | | | (First Revision) | | Screw Thread | | | | | | Part 1 Pan Head | | | | | | IS 18471 (Part 2) : 2023 | | | | | | ISO 15482: 1999 | | | | | | Fasteners Cross Recessed | | | | | | Drilling Screws with Tapping | | | | | | Screw Thread | | | | | | Part 2 Countersunk Head | | | | | | IS 18471 (Part 3): 2023 | | | | | | ISO 15483: 1999 | | | | | | Fasteners Cross Recessed | | | | | | Drilling Screws with Tapping | | | | | | Screw Thread | | | | | | Part 3 Raised Countersunk | | | | | | Head | | | | | | IS 18476: 2023 | | | | | | ISO 15480: 2019 | | | | | | Fasteners - Hexagon Washer | | | | | | Head Drilling Screws with | | | | | | Tapping Screw Thread | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 42 | IS 19167: 2025 | 30 April 2025 | NA | NA | | | ISO 21702: 2019 | | | | | | Measurement of Antiviral Activity | | | | | | on Plastics and other Non-porous | | | | | | Surfaces | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 43 | Textiles - Nylon Tape for | | NA | NA | | | Aircraft Arrester Barrier | | | | | | Specification | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 44 | IS 19214: 2025 | 30 April 2025 | NA | NA | | | Transportation of Food Animal | | | | | | Carcasses from Abattoirs to | | | | | | Processing/Distribution Centres | | | | | | Code of Practice | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 45 | IS 19218: 2025 | 30 April 2025 | NA | NA | | | Textiles - Coir Non-woven | | | | | | Stitched Composite Geotextiles | | | | | | for Erosion Control Applications | | | | | | Specification | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 46 | IS 19236: 2025 | 30 April 2025 | NA | NA | | | Agro Textiles High Density | | | | | | Polyethylene (HDPE) Woven | | | | | | Grow Bags - Specification | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 47 | IS 19238: 2025 | 30 April 2025 | NA | NA | | | Agro Textiles High Density | | | | | | Polyethylene (HDPE) Woven | | | | | | Azolla Bed - Specification | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ | 48 | IS 19263: 2025 | 30 April 2025 | NA | NA | | | Textiles - Khadi Yarn | | | | | | Specification | | | | +-----+---------------------------------------------------+--------------------+----------------------------------------------------+-------------------+ CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training) [ADVT.-III/4/Exty./84/2025-26] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054. GORAKHA NATH YADAVA Digitally signed by GORAKHA NATH YADAVA Date: 2025.05.08 15:46:20 +05'30'

Never miss important gazettes

Create a free account to save gazettes, add notes, and get email alerts for keywords you care about.

Sign Up Free