Full Text
REGD. No. D. L.-33004/99
The Gazette of India
CG-DL-E-02052025-262828
EXTRAORDINARY
PART III-Section 4
PUBLISHED BY AUTHORITY
No. 325]
NEW DELHI, TUESDAY, APRIL 29, 2025/VAISAKHA 9, 1947
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 24th April, 2025
Ref: HQ-PUB013/1/2020-PUB-BIS (1214). In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
(1) SI. No.
(2) No., Year & Title of the Indian Standards Established
(3) Date of Establishment
(4) No., Year & Title of the Indian Standards to be Withdrawn, if any
(5) Date of Withdrawal
1
IS 444: 2025
ISO 1403: 2019
Rubber Hoses, Textile-Reinforced,
for General-Purpose Water
Applications - Specification
(Sixth Revision)
22 April 2025
IS 444: 2017
ISO 1403: 2005
Rubber Hoses, Textile-
Reinforced, for
General-Purpose Water
Applications - Specification
(Fifth Revision)
22 October 2025
2
IS 1350 (Part 1): 2025
Coal and Coke - Methods of Test
Part 1 Proximate Analysis
(Third Revision)
22 April 2025
IS 1350 (Part 1) – 1984
Methods of Test for Coal and
Coke
Part 1 Proximate Analysis
(Second Revision)
22 October 2025
3
IS 1448 (Part 196): 2025
Petroleum and its Products
Methods of Test
Part 196 Determination of the
Leakage Tendencies of Automotive
Wheel Bearing Greases
22 April 2025
NA
NA
4
IS 5062 (Part 4): 2025
ISO 975: 2021
Brown Coal and Lignite
Methods of Test
Part 4 Determination of Yield of
Benzene-Soluble Extract
Automatic Method
(Third Revision)
Semi-
22 April 2025
IS 5062 (Part 4) : 2018
ISO 975: 2013
Method of Test for
Brown Coals and Lignites
Part 4 Determination of Yield
of Benzene-Soluble Extract
Semi-Automatic Method
(Second Revision)
22 October 2025
5
IS 5062 (Part 6) : 2025
ISO 5072: 2021
Brown Coal and Lignite
Methods of Test
Part 6 Determination of True
Relative Density and Apparent
Relative Density
(First Revision)
22 April 2025
IS 5062 (Part 6) : 2017
ISO 5072: 2013
Methods of Test for
Brown Coal and Lignites
Part 6 Determination of True
Relative Density and Apparent
Relative Density
22 October 2025
6
IS 7651: 2025
ISO 1436: 2020
Wire Reinforced Rubber Covered
Hydraulic Hose
Specification
(Fourth Revision)
22 April 2025
IS 7651: 2021
ISO 1436: 2017
Wire Reinforced Rubber
Covered Hydraulic Hose
Specification
(Third Revision)
22 October 2025
7
IS 8626: 2025
R Salt, Technical
Specification
(Second Revision)
22 April 2025
IS 8626-1987
Specification for R Salt,
Technical
(First Revision)
22 October 2025
8
IS 9239: 2025
Winding in Mines
Sheaves
Cast - Specification
(Second Revision)
22 April 2025
IS 9239: 1999
Winding in Mines
Cast - Specification
(First Revision)
Sheaves
22 October 2025
9
IS 11022: 2025
ISO 9665: 1998
Methods of Sampling and Test for
Glues, Bone, Skin/Fleshings and
Fish Glues
(First Revision)
22 April 2025
IS 11022-1984
Methods of Sampling and Test
for Glues (Bone,
Skin/Fleshings and Fish Glues)
22 October 2025
10
IS 12492: 2025
ISO 5774: 2023
Thermoplastics Hoses (Textile
Reinforced) for Compressed Air
Specification
(Second Revision)
22 April 2025
IS 12492: 2023
ISO 5774:2016
Specification for
Thermoplastics Hoses (Textile
Reinforced) for Compressed
Air
(First Revision)
22 October 2025
11
IS 12804: 2025
Hydraulic Design of Spillway
Aerators Guidelines
(First Revision)
22 April 2025
IS 12804: 1989
Criteria for Estimation of
Aeration Demand for Spillway
and Outlet Structures
22 October 2025
12
IS 13193: 2025
Thermoplastic Polyesters (PET and
PBT) For Moulding and Extrusion
Specification
(First Revision)
22 April 2025
IS 13193: 1992
Polyalkylene Terephthalate
(PET and PBT) For Moulding
and Extrusion Specification
22 October 2025
13
IS 13360 (Part 1): 2025
Plastics
Methods of Testing
Part 1 Introduction
(First Revision)
22 April 2025
IS 13360 (Part 1): 1992
Plastics - Methods of Testing
Part 1 Introduction
22 October 2025
14
IS 13360 (Part 2/Sec 1) : 2025
ISO 293: 2023
Plastics - Methods of Testing
Part 2 Sampling and Preparation of
Test Specimens
Section 1 Plastics Compression
Moulding of Test Specimens of
Thermoplastic Materials
(Second Revision)
22 April 2025
IS 13360 (Part 2/Sec 1): 2016
Plastics
ISO 293: 2004
Methods of Testing
Part 2 Sampling and
Preparation of Test Specimens
Section 1 Plastics
Compression moulding of test
specimens of
thermoplastic materials
(First Revision)
22 October 2025
15
IS 13360 (Part 3/Sec 4): 2025
ISO 171: 2022
Plastics Methods of Testing
Part 3 Physical and Dimensional
Properties
Section 4 Determination of Bulk
Factor of Moulding Materials
(First Revision)
22 April 2025
IS 13360 (Part 3/Sec 4): 1995
ISO 171: 1980
Plastics
Methods of Testing
Part 3 Physical and
Dimensional Properties
Section 4 Determination of
Bulk Factor of Moulding
Materials
22 October 2025
16
IS 13360 (Part 5/Sec 28/Subsec 1):
2025
ISO 6603-1: 2000
Plastics
Methods of Testing
Part 5 Mechanical Properties
Section 28 Determination of
Puncture Impact Behaviour of
Rigid Plastics
Subsection 1 Non-instrumented
Impact Testing
22 April 2025
NA
NA
17
IS 13360 (Part 6/Sec 9): 2025
Plastics Methods of Testing
Part 6 Thermal Properties
Section 9 Determination of Density
of Smoke from the Burning or
Decomposition of Plastics
(First Revision)
22 April 2025
IS 13360 (Part 6/Sec 9): 2001
Plastics Methods of Testing
Part 6 Thermal Properties
Section 9 Determination of
Density of Smoke from the
Burning or Decomposition of
Plastics
22 October 2025
18
IS 15355: 2025
ISO 8789: 2020
Rubber Hoses and Hose
Assemblies for Liquefied
Petroleum Gas (LPG) in Motor
Vehicles Specification
(Second Revision)
22 April 2025
IS 15355: 2018
ISO 8789: 2009
Rubber Hoses and Hose
Assemblies for Liquefied
Petroleum Gas (L.P.G) in
Motor Vehicles
Specification
(First Revision)
22 October 2025
19
IS 17655 (Part 1): 2025
ISO 18134-1: 2022
Solid Biofuels Determination of
Moisture Content
Part 1 Reference Method
(First Revision)
22 April 2025
IS 17655 (Part 1): 2021
ISO 18134-1: 2015
Solid Biofuels
Determination of Moisture
Content Oven Dry
Method
Part 1 Total Moisture
Reference Method
22 October 2025
20
IS 17655 (Part 3): 2025
ISO 18134-3: 2023
Solid Biofuels - Determination of
Moisture Content
Part 3 Moisture in General
Analysis Sample
(First Revision)
22 April 2025
IS 17655 (Part 3): 2021
ISO 18134-3: 2015
Solid Biofuels
Determination
of Moisture Content
Dry Method
Oven
Part 3 Moisture in General
Analysis Sample
22 October 2025
21
IS 17844: 2025
ISO 18123: 2023
Solid Biofuels
Volatile Matter
(First Revision)
Determination of
22 April 2025
IS 17844: 2022
ISO 18123: 2015
Solid Biofuels
Determination of the Content
of Volatile Matter
22 October 2025
22
IS 18998: 2025
ISO 24187: 2023
Principles for the Analysis of
Microplastics Present in the
Environment
22 April 2025
NA
NA
23
IS 19050: 2025
ISO 17541: 2014
Plastics Quantitative Evaluation
of Scratch-Induced Damage and
Scratch Visibility
22 April 2025
NA
NA
24
IS 19105: 2025
ISO 23517:2021
Plastics - Soil Biodegradable
Materials for Mulch Films for Use
in Agriculture and Horticulture
Requirements and Test Methods
Regarding Biodegradation,
Ecotoxicity and Control of
Constituents
22 April 2025
NA
NA
25
IS 19113: 2025
ISO 5412: 2022
Plastics
- Industrial Compostable
Plastic Shopping Bags
22 April 2025
NA
NA
26
IS 19151: 2025
Ultramarine Blue for Plastics
Specification
22 April 2025
NA
NA
27
IS 19157: 2025
Polycarbonate Lathi
Specification
22 April 2025
NA
NA
28
IS 19159 (Part 1) : 2025
Lubricants, Industrial Oils and
Related Products (Class L)
Family D (Compressors)
Part 1 Specifications of Categories
DAA and DAB (Lubricants for
Reciprocating and Drip Feed
Rotary Air Compressors)
(ISO 6521-1: 2019, MOD)
22 April 2025
IS 13256: 1992
Air Compressor Lubricants
Types DAA and DAB
Specification
22 October 2025
29
IS 19164: 2025
ISO 24376: 2022
Rubber, Raw Natural
Guidelines
and Requirements for Technically
Specified Low-Protein Natural
Rubber
22 April 2025
NA
NA
CHITRA GUPTA, Scientists G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./57/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.