In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards

REGD. No. D. L.-33004/99 The Gazette of India CG-DL-E-01082024-255991 EXTRAORDINARY PART III—Section 4 PUBLISHED BY AUTHORITY No. 583] NEW DELHI, THURSDAY, AUGUST 1, 2024/SHRAVANA 10, 1946 BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the: 26th July, 2024 Ref: HQ-PUB012/4/2020-PUB-BIS (974) In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. P. RAJESH, Scientist G & DDG (ITS, PRT & TNM) [ADVT.-III/4/Exty./352/2024-25] SCHEDULE +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |SI No.|No., Year & Title of the |Date of |No., Year & Title of the Indian |Date of | | |Indian Standards Established |Establishment |Standards to be withdrawn, if any |withdrawal | +======+=====================================+=================+==========================================+=================+ |(1) |(2) |(3) |(4) |(5) | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |1 |IS 2167: 2024 |25 July 2024 |IS 2167: 2019 |25 January | | |ISO 22044: 2021 | |Specification for Bottle Coolers |2025 | | |Commercial Beverage Coolers— | |(Second Revision) | | | |Classification, Requirements and | | | | | |Test Conditions | | | | | |(Third Revision) | | | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |2 |IS 2712: 2024 |25 July 2024 |IS 2712: 1998 |25 January | | |Gaskets and Packings— | |Gaskets and Packings— |2025 | | |Compressed Asbestos Fibre | |Compressed Asbestos Fibre | | | |Jointing – Specification | |Jointing – Specification | | | |(Fourth Revision) | |(Third Revision) | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |3 |IS 4049 (Part 1): 2024 |25 July 2024 |IS 4049 (Part 1) - 1988 |25 January | | |Formed Ends for Tanks and | |Specification for Formed Ends |2025 | | |Pressure Vessels Specification | |for Tanks and Pressure Vessels | | | |Part 1 Based on Outside Diameter | |Part 1 Based on Outside | | | |(Third Revision) | |Diameter | | | | | |(Second Revision) | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |4 |IS 4049 (Part 2): 2024 |25 July 2024 |IS 4049 (Part 2): 1996 |25 January | | |Formed Ends for Tanks and | |Formed Ends for Tanks and |2025 | | |Pressure Vessels Specification | |Pressure Vessels— | | | |Part 2 Based on Inside Diameter | |Specification | | | |(Second Revision) | |Part 2 Inside Diameter Basis | | | | | |(First Revision) | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |5 |IS 4120: 2024 |25 July 2024 |IS 4120-1967 |25 January | | |Tubs and Baths—Specification | |Specification for Tubs and |2025 | | |(First Revision) | |Baths | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |6 |IS 5414: 2024 |25 July 2024 |IS 5414: 1995 |25 January | | |Gaskets and Packings—Gland | |Gaskets and Packings—Gland |2025 | | |Packing Jute and Hemp— | |Packing Jute and Hemp— | | | |Specification | |Specification | | | |(Second Revision) | |(First Revision) | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |7 |IS 5566: 2024 |25 July 2024 |IS 5566-1970 |25 January | | |Vegetable Fibre Base Jointing | |Specification for Vegetable |2025 | | |Material—Specification | |Fibre Base Jointing Material | | | |(First Revision) | | | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |8 |IS 5819: 2024 |25 July 2024 |IS 5819-1970 |25 January | | |Recommended Short-Circuit | |Recommended Short-Circuit |2025 | | |Ratings of High Voltage PVC | |Ratings of High Voltage PVC | | | |Cables | |Cables | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |9 |IS 5895 2024 |25 July 2024 |IS 5895-1985 |25 January | | |Steel Roller Conveyors— | |Specification for Steel Roller |2025 | | |Specification | |Conveyors | | | |(Second Revision) | |(First Revision) | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |10 |IS 6291: 2024 |25 July 2024 |IS 6291-1971 |25 January | | |Clasp Knife—Specification | |Specification for Knife, Clasp |2025 | | |(First Revision) | | | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |11 |IS 8274: 2024 |25 July 2024 |IS 8274-1976 |25 January | | |Drawbar Eyes and Forecarriage | |Specification for Drawbar Eyes |2025 | | |Pins for Connection Between | |and Forecarriage Pins for | | | |Trailers of Gross Mass Above 5 | |Connection Between Trailers of | | | |Tonnes and Up to | |Gross Mass Above 5 Tonnes | | | |35 | |and Up to 35 Tonnes and | | | |Tonnes and Transport Tractor— | |Transport Tractor | | | |Specification | | | | | |(First Revision) | | | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |12 |IS 9066: 2024 |25 July 2024 |IS 9066-1979 |25 January | | |Lubricated Cotton Gland Packings | |Specification for Lubricated |2025 | | |Specification | |Cotton Gland Packings | | | |(First Revision) | | | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |13 |IS 9192: 2024 |25 July 2024 |IS 9192-1979 |25 January | | |Flameproof Hand-Held Rotary | |Specification for Flameproof |2025 | | |Electric Drilling Machine for Use | |Hand-Held Rotary Electric | | | |in Mines—Specification | |Drilling Machine for Use in | | | |(First Revision) | |Mines | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |14 |IS 9464: 2024 |25 July 2024 |IS 9464-1980 |25 January | | |Horizontal Centrifugal Pumps for | |Specification for Horizontal |2025 | | |Marine Use—Specification | |Centrifugal Pumps for Marine | | | |(First Revision) | |Use | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |15 |IS 10008: 2024 |25 July 2024 |IS 10008: 1992 |25 January | | |Beater Addition Jointings— | |Beater Addition Jointings— |2025 | | |Specification | |Specification | | | |(Second Revision) | |(First Revision) | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |16 |IS 10459: 2024 |25 July 2024 |IS 10459-1983 |25 January | | |General Purpose Plug Valves— | |Specification for General |2025 | | |Specification | |Purpose Plug Valves | | | |(First Revision) | | | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |17 |IS 10864: 2024 |25 July 2024 |IS 10864: 2013 |25 January | | |Metal Jacketed Gaskets for Pipe | |Metal Jacketed Gaskets for |2025 | | |Flanges and Heat Exchanger | |Pipe Flanges and Heat | | | |Flanges—Specification | |Exchanger Flanges | | | |(Second Revision) | |Specification | | | | | |(First Revision) | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |18 |IS 11140: 2024 |25 July 2024 |IS 11140-1984 |25 January | | |Automotive Vehicles—Footrests | |Specification for Footrest |2025 | | |for Two-Wheeled Motor Vehicles | |Assembly for Mopeds | | | |Requirements | | | | | |(First Revision) | | | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |19 |IS 13282: 2024 |25 July 2024 |IS 13282: 1991 |25 January | | |Mine Haulage Tracks—Track | |Mine Haulage Tracks—Track |2025 | | |Sleepers—General Requirements | |Sleepers General | | | |(First Revision) | |Requirements | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |20 |IS 14106: 2024 |25 July 2024 |IS 14106: 2018 |25 January | | |Direct Action Handpumps— | |Direct Action Hand Pumps— |2025 | | |Specification | |Specification | | | |(Second Revision) | |(First Revision) | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |21 |IS 15437: 2024 |25 July 2024 |IS 15437: 2003 |25 January | | |ISO 5856: 2008 | |ISO 5856: 1991 |2025 | | |Aerospace—Screws, 100 Degrees | |Aerospace—Screws, 100° | | | |Normal Countersunk Head, | |Normal Countersunk Head, | | | |Internal Offset Cruciform Ribbed | |Internal Offset Cruciform | | | |or Unribbed Drive, Normal Shank, | |Ribbed Drive, Normal Shank, | | | |Short or Medium Length MJ | |Short or Medium Length MJ | | | |Threads, Metallic Material, Coated | |Threads, Metallic Material, | | | |or Uncoated, Strength Classes Less | |Coated or Uncoated, Strength | | | |Than or Equal to 1 100 Mpa— | |Classes Less Than or Equal to | | | |Dimensions | |1 100 Mpa—Dimensions | | | |(First Revision) | | | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ |22 |IS/IEC 61462: 2023 |25 July 2024 |IS/IEC 61462: 2007 |25 January | | |Composite Hollow Insulators— | |Composite Hollow Insulators |2025 | | |Pressurized and Unpressurized | |—Pressurized and | | | |Insulators for Use in Electrical | |Unpressurized Insulators for | | | |Equipment with a.c. Rated Voltage | |Use in Electrical Equipment | | | |Greater than 1 000 V and d.c. | |with Rated Voltage Greater | | | |Voltage Greater than 1 500 V— | |than 1 000 V—Definitions, | | | |Definitions, Test Methods, | |Test Methods, Acceptance | | | |Acceptance Criteria and Design | |Criteria and Design | | | |Recommendations | |Recommendations | | | |(First Revision) | | | | +------+-------------------------------------+-----------------+------------------------------------------+-----------------+ Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.