Full Text
REGD. No. D. L.-33004/99
The Gazette of India
CG-DL-E-26062025-264166
EXTRAORDINARY
PART II—Section 3—Sub-section (i)
PUBLISHED BY AUTHORITY
NEW DELHI, THURSDAY, JUNE 26, 2025/ASHADHA 5, 1947
No. 375]
MINISTRY OF FINANCE
(Department of Revenue)
NOTIFICATION
New Delhi, the 26th June, 2025
No. 21/2025-Customs (ADD)
G.S.R. 418(E). — Whereas in the matter of "Plastic Processing Machines” (hereinafter referred to as the subject
goods) falling under tariff items 8477 10 00 or 8477 90 00 of the First Schedule to the Customs Tariff Act, 1975 (51 of
1975) (hereinafter referred to as the Customs Tariff Act), originating in, or exported from China PR and Taiwan
(hereinafter referred to as the subject countries), and imported into India, the designated authority in its final findings
vide notification No. 06/09/2024-DGTR, dated the 27th March, 2025, published in the Gazette of India, Extraordinary,
Part I, Section 1, dated the 27th March, 2025, read with corrigendum dated 26th June, 2025, has, inter alia come to the
conclusion that-
(i) the subject goods have been exported to India from the subject countries at dumped prices;
(ii) the domestic industry has suffered material injury on account of dumped imports from subject countries;
(iii) the material injury has been caused to the domestic industry by the dumped imports of subject goods from
the subject countries,
and has recommended imposition of an anti-dumping duty on the imports of subject goods, originating in, or exported
from the subject countries and imported into India, in order to remove injury to the domestic industry.
Now, therefore, in exercise of the powers conferred by sub-sections (1) and (5) of section 9A of the Customs
Tariff Act read with rules 18 and 20 of the Customs Tariff (Identification, Assessment and Collection of Anti-dumping
Duty on Dumped Articles and for Determination of Injury) Rules, 1995, the Central Government, after considering the
aforesaid final findings of the designated authority, hereby imposes on the subject goods, the description of which is
specified in column (3) of the Table below, falling under tariff items of the First Schedule to the Customs Tariff Act as
specified in the corresponding entry in column (2), originating in the countries as specified in the corresponding entry
in column (4), exported from the countries as specified in the corresponding entry in column (5), produced by the
producers as specified in the corresponding entry in column (6), and imported into India, an anti-dumping duty
calculated at the rate as specified in the corresponding entry in column (7) of the said Table, namely:-
TABLE
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| S. | Tariff Items | Description of the goods | Country of origin | Country of export | Producer | Duty as % of CIF Value |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| (1) | (2) | (3) | (4) | (5) | (6) | (7) |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 1. | 8477 10 00 | Plastic Processing | China PR | Any country | Dongguan Fu Chun Shin Plastic Machinery Manufacture Co., Ltd. and Fu Chun Shin | 48% |
| | or | Machinery | | including China PR | (Ningbo) Machinery Manufacture Co., Ltd | |
| | 8477 90 00 | | | | | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 2. | -do- | -do- | China PR | Any country | Chen Hsong Machinery Co Ltd, Chen Hsong Sales & Marketing (Shenzhen) Co., Ltd, Chen | 27% |
| | | | | including China PR | Hsong Machinery (Ningbo) Co., Ltd., Chen Hsong Machinery (Shenzhen) Co., Ltd, Foshan Shunde Chen De Precision Machinery Co., Ltd., Foshan Shunde Chen De Plastics Machinery Co., Ltd | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 3. | -do- | -do- | China PR | Any country | Yizumi Precision Molding Technology Co., Ltd., Yizumi High Speed Packaging | 35% |
| | | | | including China PR | Technology Co., Ltd, Yizumi Precision Machinery (HK) Co., Limited, Yizumi Precision Machinery (Suzhou) Co., Ltd | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 4. | -do- | -do- | China PR | Any country | Husky Injection Molding Systems Shanghai Ltd | 0% |
| | | | | including China PR | | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 5. | -do- | -do- | China PR | Any country | Any producer other than producers mentioned at S No. 1,2,3 and 4 above | 63% |
| | | | | including China PR | | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 6. | -do- | -do- | Any country | China PR | Any producer | 63% |
| | | | other than China PR | | | |
| | | | and Taiwan | | | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 7. | -do- | -do- | Taiwan | Any country | Chen Hsong Machinery Taiwan Co., Ltd. | 39% |
| | | | | including Taiwan | | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 8. | -do- | -do- | Taiwan | Any country | Huarong Plastic Machinery Co., Ltd | 0% |
| | | | | including Taiwan | | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 9. | -do- | -do- | Taiwan | Any country | Any producer other than producers mentioned at S No. 7 and 8 above | 53% |
| | | | | including Taiwan | | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
| 10. | -do- | -do- | Any country | Taiwan | Any producer | 53% |
| | | | other than China PR | | | |
| | | | and Taiwan | | | |
+-----+--------------+--------------------------+---------------------+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+
Note 1: The product under consideration in the present investigation is Plastic Processing Machines (PPM) or Injection
Moulding Machines, also known as injection presser, used for processing and moulding of plastic materials.
Note 2: The scope of the product under consideration includes all kinds of plastic processing or injection moulding
machines, having a clamping force not less than 40 tonnes and not more than 1500 tonnes. The scope of the product
under consideration includes machines in fully assembled, semi knocked down (SKD), complete knocked down form
(CKD), or a combination of SKD & CKD. The scope is further clarified below
a. A plastic processing machine in semi knocked down stage shall mean a plastic processing machine which is not
fully assembled but is transacted as a plastic processing machine with parts or sub-assemblies not fitted together
and the machine is not ready to use. A semi knockdown machine shall also imply sub-assemblies namely
clamping/clamp unit, injection unit with or without screw & barrel, machine base frame and fabrication
frames/covers imported for injection moulding machine.
b. A plastic processing machine in completely knocked down stage shall mean a plastic processing machine in its
incomplete or unfinished form, has the essential character of the complete machine when put together, and
contains all components required for assembling the machines.
Note 3 : The following products are specifically excluded from the scope of the product under consideration: -
a. Blow moulding machines classified under tariff item 8477 30 00 under the Customs Tariff Act, 1975;
b. Vertical injection moulding machines;
c. All electric injection moulding machines wherein the mechanical movements such as injection, moulding
closing, moulding opening, ejection, screw-drive etc. are controlled by independent servo motors and having
digital control system and without hydraulic unit;
d. Multi-colour/multi-mould machinery for making footwear, rotary injection moulding machinery for making
footwear and footwear sole/strap/heel injection moulding machine classified under the Custom Tariff Act, 1975
under sub heading 8453;
e. Second hand/used plastic processing machines;
f. Imports of any standalone parts/components, other than those specified above;
g. Imports of clamping/clamp unit, injection unit with or without screw & barrel, machine base frame and
fabrication frames/covers imported for production of a machine other than injection moulding machines;
Note 4: The customs classification is indicative only and not binding on the scope of the product under consideration.
2. The anti-dumping duty imposed under this notification shall be levied for a period of five years (unless revoked,
superseded or amended earlier) from the date of publication of this notification in the Official Gazette, and shall be
payable in Indian currency.
Explanation. – For the purposes of this notification,
(a) rate of exchange applicable for the purposes of calculation of such anti-dumping duty shall be the rate which is
specified in the notification of the Government of India, in the Ministry of Finance (Department of Revenue),
issued from time to time, in exercise of the powers conferred by section 14 of the Customs Act, 1962 (52 of 1962),
and the relevant date for the determination of the rate of exchange shall be the date of presentation of the bill of
entry under section 46 of the said Act.
(b) "CIF value" means assessable value as determined under section 14 of the Customs Act, 1962 (52 of 1962).
[F. No. 190354/52/2025-TRU]
DHEERAJ SHARMA, Under Secy.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.
KUMER CHAND Digitally signed by KUMER
MEENA