Full Text
REGD. No. D. L.-33004/99
The Gazette of India
CG-DL-E-01042025-262208
EXTRAORDINARY
PART II-Section 3-Sub-section (i)
PUBLISHED BY AUTHORITY
No. 174] NEW DELHI, TUESDAY, APRIL 1, 2025/CHAITRA 11, 1947
MINISTRY OF STEEL
NOTIFICATION
New Delhi, the 1st April, 2025
G.S.R. 213(E).—In supersession of earlier Domestically Manufactured Iron & Steel Products Policy, the
revised Domestically Manufactured Iron & Steel Products Policy-2025 for providing preference to Domestically
Manufactured Iron & Steel Products in Government procurement is hereby published for general information.
POLICY FOR PROVIDING PREFERENCE TO DOMESTICALLY MANUFACTURED IRON & STEEL
PRODUCTS IN GOVERNMENT PROCUREMENT- REVISED, 2025
1. Background
1.1. This policy provides preference for Domestically Manufactured Iron and Steel Products (DMI&SP) in
Government procurement.
1.2. The policy applies to iron & steel products notified in Appendix A and capital goods for manufacturing iron
& steel products notified in Appendix B, produced in compliance with prescribed quality standards, as
applicable. This policy shall not apply to the purchase of iron & steel products with a view to commercial
resale or with a view to use in the production of goods for commercial sale.
2. Definitions
2.1. Bidder may be a domestic/ foreign manufacturer of iron & steel or their selling agents/ authorized
distributors/authorized dealers/ authorized supply houses or any other company engaged in the bidding of
projects funded by Government agencies.
2.2. Domestically Manufactured Iron & Steel Products are those iron and steel products that are manufactured
by entities that are registered and established in India, including in Special Economic Zones (SEZs).
2.3. Domestic Manufacturer is a manufacturer of iron & steel products conforming to guidelines in section 7 and
the definition of 'manufacturer' as per the Central Excise Act.
2.4. Government for the purpose of the Policy means Government of India.
2.5. Government agencies include Government PSUs, Societies, Trusts, and Statutory bodies set up by the
Government of India.
2.6. MoS shall mean Ministry of Steel, Government of India.
2.7. Net Selling Price shall be the invoiced price excluding net domestic taxes and duties.
2.8. Semi-Finished Steel shall mean Ingots, billets, blooms, and slabs, which can be subsequently processed into
finished steel.
2.9. Finished Steel shall mean flat and long products, which can be subsequently processed into manufactured
items.
2.10. L1 means the lowest tender or the lowest bid or the lowest quotation received in a tender, bidding process, or
other procurement solicitation as adjudged in the evaluation process as per the tender or other procurement
solicitation.
2.11. Margin of purchase preference means the maximum extent to which the price quoted by a domestic supplier
may be above L1 for the purpose of purchase preference. In the case of DMI&SP policy, the margin of
purchase preference shall be for items in Appendix B.
2.12. Melt & Pour is defined as the steel that has been produced in a steel-making furnace and poured into its first
solid shape. The location where this process takes place is called the country of melt and pour (COM). The
COM is the original location where crude steel is first produced in a liquid state and poured into its first solid
shape. The first solid shape can be a semi-finished product, like a slab, billet, ingot, or a finished steel mill
product.
2.13. Domestic value addition means the amount of value added in India which shall be the total value of the item
to be procured (excluding net domestic indirect taxes) minus the value of imported content in the item
(including all custom duties) as a proportion of the total value of the item to be procured, in percent. The
'domestic value addition' definition shall be in line with the DPIIT guidelines and shall be suitably amended
in case of any changes by DPIIT in the future. For the purpose of this policy document, domestic value addition
and local content have been used interchangeably.
% Domestic value addition =
{Total value of the item to be procured (excluding net domestic indirect
taxes) - The value of imported content in the item (including all customs
duties)}
-------------------------------------------------------------------- X 100%
{Total value of the item to be procured}
3. Exclusions
3.1. Waivers may be granted by the Ministry of Steel to all such Government procurements subject to the below
conditions:
3.1.1. Where specific grades of steel are not manufactured in the country, or
3.1.2. Where the quantities as per the demand of the project cannot be met through domestic sources.
3.2. Exemption requests shall be submitted to the Standing Committee along with sufficient proof of unavailability
of iron & steel products domestically.
4. Standing Committee
4.1. A Standing Committee chaired by the Secretary (Steel), shall oversee the implementation of the policy.
4.2. The Committee shall comprise of experts drawn from Industry/Industry Association/Government Institution
or Body/Ministry of Steel. The said Committee in MoS shall have the mandate for the following:
4.2.1. Monitor the implementation of the policy.
4.2.2. Review and notify the list of Iron & Steel products and the 'Domestic Value Addition' requirement
criteria as mentioned in Appendix A and Appendix B.
4.2.3. Issue necessary clarifications for implementation of the policy including grant of exclusions to procuring
agencies as per Para 3.
4.2.4. Constitute a grievance redressal committee for preliminary examination of complaints related to
implementation of this policy.
4.2.5. Issue directions for suitable action to Ministries/Departments concerned in case of non-compliance with
this policy by the procuring agency and advise.
4.3. Wherever a procuring entity concludes that an unreasonably high price has been quoted by the sole
bidder/manufacturer, the matter may be referred to the Committee. In such cases, the procuring entity would
be required to substantiate its case with complete and thorough documentation.
4.4. Specifying foreign certifications/unreasonable technical specifications in bid document is a restrictive and
discriminatory practice against local suppliers. If foreign certification is required to be stipulated because of
non-availability of Indian Standards and/or for any other reason, the same shall be done only after written
approval of the Committee.
5. Applicability
5.1. The policy applies to every Ministry or Department of Government and all agencies/entities under their
administrative control and to projects funded by these agencies for the purchase of iron & steel products for
government projects. All Central Sector Schemes (CS)/Centrally Sponsored Schemes (CSS) for which
procurement is made by States and Local Bodies, come within the purview of this Policy if that project/
scheme is fully/partly funded by the Government of India.
5.2. The policy applies to public sector steel manufacturers and agencies/entities under their administrative control
for purchase of capital goods (Appendix-B) for manufacturing iron & steel products, not with a view to
commercial resale.
5.3. The policy shall apply to projects and non-projects where the total procurement value of iron and steel products
(Appendix-A) in a contract is greater than Rs. 5 lakhs, on itemised basis.
5.4. No Global Tender Enquiry (GTE) shall be invited for tenders related to the procurement of iron and steel
products (Appendix-A of the DMI&SP Policy). No Global Tender Enquiry (GTE) shall be invited for tenders
related to the procurement of Capital Goods for manufacturing iron & steel products (Appendix-B of the
DMI&SP Policy) having estimated value up to Rs. 200 Crore except with the approval of competent authority
as designated by Department of Expenditure.
5.5. The policy applies to the purchase of iron & steel products by private agencies for fulfilling an EPC contract
and/or any other requirement of a Ministry or Department of Government or their PSUs.
6. Tender procedure for procurement
6.1. Procuring agencies shall follow standard procurement procedures, in accordance with instructions of the
Ministry of Finance and CVC while adhering to DMI&SP policy.
6.2. The tender document, for procurement of both Goods as well as for EPC contracts, should explicitly outline
the qualification criteria for adherence to the requirement as mentioned in Appendix A and Appendix B.
6.3. Domestic manufacturers of products under Appendix-A and Appendix-B shall self-certify the local content as
per form-1 placed in the policy, at the time of bidding.
6.4. Bidders who are selling agents/authorized distributors/authorized dealers/authorized supply houses of the
domestic manufacturers of iron & steel products, covered by Appendix-A, are eligible to bid with self-
certification on behalf of the domestic manufacturers under the policy, subject to the bidder furnishing an
authorisation certificate issued by the domestic manufacturer at the time of delivery.
6.5. For products covered under Appendix B of the DMI&SP policy, the bidder shall furnish certification issued
by the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost
accountant or practicing chartered accountant (in respect of suppliers other than companies) declaring that the
capital goods to be used in iron & steel industry are domestically manufactured in terms of the domestic value
addition prescribed.
6.6. If Indian suppliers of an item are not allowed to participate and/ or compete in procurement by any foreign
government, due to restrictive tender conditions which have direct or indirect effect of barring Indian
companies such as registration in the procuring country, execution of projects of specific value in the procuring
country etc., it shall provide such details to the procuring entities for appropriate reciprocal action.
6.7. Entities of countries that have been identified by the Ministry of Steel as not allowing Indian companies to
participate in their Government procurement for any item related to the Ministry of Steel shall not be allowed
to participate in Government procurement in India for all items related to Ministry of Steel, except for the list
of items published by Ministry of Steel permitting their participation.
6.8. The stipulation above shall be part of all tenders including those on GeM portal invited by the Central
Government procuring entities.
6.9. In case restrictive or discriminatory conditions against domestic suppliers are included in bid documents, an
inquiry shall be conducted by the Administrative Department undertaking the procurement (including
procurement by any entity under its administrative control) to fix responsibility for the same. Thereafter,
appropriate action, administrative or otherwise, shall be taken against erring officials of procurement entities
under relevant provisions. Intimation on all such action shall be sent to the Standing Committee under the
DMI&SP policy.
6.10. A supplier debarred by any procuring entity for violation of this Order shall not be eligible for preference under
this Order for procurement by any other procuring entity for the duration of the debarment. The debarment for
such other procuring entities shall take effect prospectively from the date on which it comes to the notice of
other procurement entities.
6.11. In case, the matter is referred to the Ministry of Steel, the grievance redressal committee set up under the MoS
shall dispose of the complaint within 4 weeks of its reference and receipt of all documents from the bidder
after taking into consideration, the view of the Government Agency. The bidder shall be required to furnish
the necessary documentation in support of domestic value addition claimed in iron & steel products to the
grievance redressal committee under MoS within 2 weeks of the reference of the matter.
6.12. Procuring agency shall define the penalties, in case of a wrong declaration by the bidder of the prescribed
domestic value addition, in the tender document. The penalties may include forfeiting of the EMD, other
financial penalties, and blacklisting of such manufacturer/service provider etc., in terms of extant rules.
7. Implementation monitoring by the Ministry of Steel
7.1. The policy provisions shall be applicable for 5 years from the date of publication and may further be extended
at the discretion of the Ministry of Steel.
7.2. MoS shall be the nodal ministry to monitor the implementation of the policy.
7.3. Agencies covered under DMI&SP policy shall send declaration on a quarterly basis indicating the extent of
compliance to the policy and reasons for non-compliance thereof, during the preceding financial year.
Appendix-A
+-----+-----------------------------------------------------------------+---------+-------------+
| SI. | Iron & Steel Products | HS code | Condition |
| No | | | |
+=====+=================================================================+=========+=============+
| 1 | Flat-rolled products of iron or non-alloy steel, of a width of | 7208 | Melt & Pour |
| | 600 mm or more, hot rolled, not clad, plated or coated | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 2 | Flat-rolled products of iron or non-alloy steel, of a width of | 7209 | Melt & Pour |
| | 600 mm or more, cold rolled (cold-reduced), not clad, plated or | | |
| | coated | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 3 | Flat-rolled products of iron or non-alloy steel, of a width of | 7210 | Melt & Pour |
| | 600 mm or more, clad, plated or coated | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 4 | Flat-rolled products of iron or non-alloy steel, of a width of | 7211 | Melt & Pour |
| | less than 600 mm, not clad, plated or coated | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 5 | Flat-rolled products of iron or non-alloy steel, of a width of | 7212 | Melt & Pour |
| | less than 600 mm, clad, plated or coated | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 6 | Bars and rods, hot-rolled, in irregularly wound coils, of iron | 7213 | Melt & Pour |
| | or non-alloy steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 7 | Other bars and rods of iron or non-alloy steel, not further | 7214 | Melt & Pour |
| | worked than forged, hot rolled, hot-drawn or hot-extruded, but | | |
| | including those twisted after rolling | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 8 | Other bars and rods of iron or non-alloy steel | 7215 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 9 | Angles, shapes and sections of iron or non-alloy steel | 7216 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 10 | Wire of iron or non-alloy steel | 7217 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 11 | Flat-rolled products of stainless steel, of a width of 600 mm | 7219 | Melt & Pour |
| | or more | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 12 | Flat-rolled products of stainless steel, of a width of less | 7220 | Melt & Pour |
| | than 600 mm | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 13 | Other bars and rods of stainless steel; angles, shapes and | 7222 | Melt & Pour |
| | sections of stainless steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 14 | Wire of other alloy steel | 7229 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 15 | Rails, railway or tramway track construction material of iron | 7302 | Melt & Pour |
| | or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 16 | Tubes, pipes and hollow profiles, of cast iron | 7303 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 17 | Tubes, pipes and hollow profiles, seamless, of iron (other than | 7304 | Melt & Pour |
| | cast iron) or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 18 | Other tubes and pipes (for example, welded, riveted or similarly | 7305 | Melt & Pour |
| | closed), having circular cross-sections, the external diameter | | |
| | of which exceeds 406.4 mm, of iron or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 19 | Other tubes, pipes and hollow profiles (for example, open seam | 7306 | Melt & Pour |
| | or welded, riveted or similarly closed), of iron or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 20 | Tube or pipe fittings (for example, connectors/couplings, elbow | 7307 | Melt & Pour |
| | sleeves), of iron or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 21 | Bars and rods, hot-rolled, in irregularly wound coils, of | 7221 | Melt & Pour |
| | stainless steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 22 | Wire of stainless steel | 7223 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 23 | Flat-rolled products of other alloy steel, of a width of 600 mm | 7225 | Melt & Pour |
| | or more, including electrical steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 24 | Flat-rolled products of other alloy steel, of a width of less | 7226 | Melt & Pour |
| | than 600 mm, including electrical steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 25 | Bars and rods, hot-rolled, in irregularly wound coils, of other | 7227 | Melt & Pour |
| | alloy steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 26 | Other bars and rods of other alloy steel; angles, shapes and | 7228 | Melt & Pour |
| | sections, of other alloy steel; hollow drill bars and rods, of | | |
| | alloy or non alloy steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 27 | Sheet piling of iron or steel, whether or not drilled, punched | 7301 | Melt & Pour |
| | or made from assembled elements; welded angles, shapes and | | |
| | sections, of iron or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 28 | Structures (excluding prefabricated buildings of heading 9406) | 7308 | Melt & Pour |
| | and parts of structures | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 29 | Reservoirs, tanks, vats and similar containers for any material | 7309 | Melt & Pour |
| | (other than compressed or liquefied gas), of iron or steel, of | | |
| | a capacity exceeding 300 | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| | whether or not lined or heat insulated, but not fitted with | | |
| | mechanical or Thermal equipment | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 30 | Tanks, casks, drums, cans, boxes and similar containers, for | 7310 | Melt & Pour |
| | any material(other than compressed or liquefied gas), of iron | | |
| | or steel, of a capacity not exceeding 300L,whether or not lined | | |
| | or heat-insulated, but not fitted with mechanical or thermal | | |
| | equipment | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 31 | Containers for compressed or liquefied gas, of iron or steel | 7311 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 32 | Stranded wire, ropes, cables, plaited bands, slings and the | 7312 | Melt & Pour |
| | like, of iron or steel, not electrically insulated | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 33 | Barbed wire of iron or steel; twisted hoop or single flat wire, | 7313 | Melt & Pour |
| | barbed or not, and loosely twisted double wire, of a kind used | | |
| | for fencing, of iron or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 34 | Grill, netting and fencing, of iron or steel wire; expanded | 7314 | Melt & Pour |
| | metal of iron or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 35 | Chain and parts thereof, of iron or steel | 7315 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 36 | Anchors, grapnels and parts thereof, of iron or steel | 7316 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 37 | Articles of iron and steel | 7317 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 38 | Articles of iron and steel | 7318 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 39 | Articles of iron and steel | 7319 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 40 | Springs and leaves for springs, of iron or steel | 7320 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 41 | Stoves, ranges,grates,cookers(includingthosewithsubsidiaryboile | 7321 | Melt & Pour |
| | rsforcentral heating), barbecues, braziers, gas-rings, plate | | |
| | warmers and similar non- electric domestic appliances, and | | |
| | parts thereof, of iron or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 42 | Radiators for central heating, not electrically heated, and | 7322 | Melt & Pour |
| | parts thereof, of iron or steel; air heaters and hot air | | |
| | distributors, not electrically heated, incorporating a motor- | | |
| | driven fan or blower, and parts thereof, of iron or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 43 | Tables and similar house hold articles and parts thereof, of | 7323 | Melt & Pour |
| | iron or steel | | |
+-----+-----------------------------------------------------------------+---------+-------------+
| 44 | Sanitary ware and parts thereof, of iron or steel | 7324 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 45 | Other cast articles of iron or steel | 7325 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 46 | Electrical steel and other articles of iron or steel | 7326 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 47 | Railway or tramway passenger coaches, not self-propelled | 8605 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 48 | Railway or tramway goods vans and wagons, not self-propelled | 8606 | Melt & Pour |
+-----+-----------------------------------------------------------------+---------+-------------+
| 49 | Parts of railway or tramway locomotives or rolling-stock; such | 8607 | Melt & Pour |
| | as bogies, bissel-bogies, axles and forged wheels, and parts | | |
| | thereof | | |
+-----+-----------------------------------------------------------------+---------+-------------+
Appendix B
Indicative list of capital goods(non-exhaustive) for manufacturing iron & steel products
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| SI. | Plant shop | Capital goods | Domestic value |
| No. | | | addition |
| | | | requirement |
+=====+==========================+==================================================================+=================================+
| 1 | Raw material | Apron feeder, barrel couplings, heavy-duty bearings, hydraulic | 50% |
| | handling system | disc brakes, tanker & container for powdered materials, conveyor | |
| | | belt for pipe conveyors, high angle conveyor system, crushers, | |
| | | crane rail lubrication system, four girder EOT Crane, crane | |
| | | weighing system, crane air conditioning, fluid couplings, forklift | |
| | | trucks, hydraulic motors, hydraulic system, locking-assembly | |
| | | (friction grip), load cells, level sensors, pipe conveyor system,| |
| | | plough/paddle feeder, pneumatic transportation dense & lean | |
| | | phase, reclaimers, radio remote control, rail fixing | |
| | | arrangements(special), rapid/ flood loading system, stackers, | |
| | | special screen, slew ring bearings, tipplers, transfer cars, tongs | |
| | | (special), vibration, isolation system(spring damper), wagon | |
| | | tipplers, wagon loaders | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 2 | Mineral | Industrial crushers, grinding mills, conventional screens, slurry| 50% |
| | benefaction | pumps, hirate thickeners, filters, hydro clones | |
| | (iron ore and | | |
| | coal) equipment | | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 3 | Coke oven | Silica Refractory, Anchorage System, Waste gas valve with | 50% |
| | | branch pipe, Flash Plate, Door Frame, door body, Minor Casting: | |
| | | Gooseneck, Valve box, AP Lid, Charging & inspection hole lid | |
| | | and frame Reversing mechanism, Centralised lubrication system, | |
| | | Hydrojet Door Cleaning Mechanism, Spillage code conveyor | |
| | | system, skip hoist, Door Lowering Rack, Isolation/Reversing | |
| | | Cocks, Level II automation, Oven machines | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 4 | By-product | Primary Gas Cooler, Electrostatic Tar Precipitator, H2S, NH3 & | 50% |
| | plant | Naphthalene Scrubber, Combi Stripper, | |
| | | Flushing Liquor Pump, Claus Kiln, Claus reactors, Waste Heat | |
| | | Boilers, Decanters | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 5 | Sinter Plant | Pallet car, Drive/discharge end Sprocket assembly, Curved rail, | 50% |
| | equipment | Slide rails, Hot sinter breaker and Grizzly, | |
| | | Dip rail & running rail, Impeller assembly for Process fan, Drive| |
| | | assembly of Sinter machine, Hi-intensity Mixer &Noduliser | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 6 | Pellet plant | Pallet car, Drive/discharge end Sprocket assembly, Curved rail, | 50% |
| | equipment | Slide rails, running rail, Vertical roller mill, Impeller assembly for | |
| | | Process fan, Drive assembly of Indurating machine, Hi-intensity | |
| | | Mixer, Balling disc, Single deck roller screen and Double deck | |
| | | roller screen | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 7 | Blast furnace | Bellles stop system with Bleeder valve, SG Iron stave coolers, | 50% |
| | equipment | Copper stave coolers, Stock level indicator (Radar Type), Mud gun,| |
| | | Drilling machine and Manipulator, Gas Cleaning Plant system, Top | |
| | | Recovery Turbine system including its by-pass valve, De-bricking | |
| | | Machine, Re-railing equipment, PCI system, Grinding mill for PCI,| |
| | | Stock level indicator, Tuyere Stock assembly, Waste Heat Recovery| |
| | | system, BF & Hot Blast Stoves Technological Valves, Above Burden | |
| | | probes, Slag granulation unit, Tuyere&Tuyere cooler, Torpedo Ladle| |
| | | Car, BF hearth refractory | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 8 | Direct reduction | Charge distributer, Upper & lower seal leg, Reformer & Re- | 50% |
| | plant equipment | cuperator system, Burden feeders, Turbo-expander, Process Gas | |
| | | Compressor, Seal gas compressors & bottom seal gas compressors, | |
| | | Seal gas generators &driers,ProcessGasHeater,CO2removal plant | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 9 | Basic oxygen | Main and Maintenance equipment comprising of converter, gunning | 50% |
| | furnace | machine, Refractory/slag monitoring device, converter vessel, | |
| | equipment | trunnion ring and suspension system, trunnion bearings and | |
| | | housing, Converter bull gear unit and tilt drive system, Rotary | |
| | | joint for converter, bottom stirring system, Lance body with clamping,| |
| | | Lance copper tips, Valve stations for oxygen blowing/ bottom | |
| | | stirring, Sub-lance system, Off gas analyzer with process module | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| | | i.e. Process software/ hardware, container lab Measurement probes,| |
| | | Switch over station, ID fan for primary gas, Hot metal and steel | |
| | | ladle, Ladle Transfer car, Ladle maintenance equipment, Slag pot,| |
| | | Slag pot transfer car, Scrap boxes, Scrap Transfer car, Lance | |
| | | carriage, Lance guide, Crane &hoist, Lance hoist & trolley, Lance| |
| | | tilting device, Traverse for lifting lances, Bunker of various | |
| | | sizes, Bin Vibrator, Weighing Hopper, Maintenance stands, De | |
| | | dusting suction hood, Teeming/HM, ladle relining stands, Stand | |
| | | Cooling stack inspection device, Hood traverse carriage, | |
| | | Refractories, Bypass & isolation valves, Flare stack & ignition | |
| | | system, Scrubbing tower shell - Wet gas cleaning system, Dog | |
| | | house, Ladle drier, ladle pre-heater, ladle cooler, Fume | |
| | | collection hoods, Clean gas stack, Dust silo, Weigh Bridge, Slag | |
| | | retaining device | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 10 | Electric arc | Furnace proper (includes furnace lower shell, upper shell and | 50% |
| | furnance | roof, Tilting platform, Furnace Gantry) and transformer, | |
| | | Electrode regulation system, Hydraulic system, Refractories, Parts | |
| | | of Level I & Level Il Automation system. LF water cooled ladle | |
| | | roof, electrode mast and arms, electrode regulating system, wire | |
| | | feeding system, Bottom inert gas stirring Valve stand for porous | |
| | | plug and top lance, Emergency lance mechanism, Lance carriage | |
| | | system with drive unit, Automatic temperature, sampling & bath | |
| | | level / O2 measurement, Temp. & oxygen immersion lance, lance | |
| | | carriage system with drive unit, Hydraulic system, Refractories, | |
| | | Ladle roof Delta portion, RH proper (includes Ladle transfer car,| |
| | | vacuum vessel, Vessel lifting & lowering system. Hydraulic | |
| | | system, Multi Function lance, Valve racks/station, Electrode | |
| | | clamp unit, conductor of electrode arms, water cooled cable, A R | |
| | | stirring valve rack, lance transport car, Refractory lance, | |
| | | Hydraulic cylinder, Ladle roof lifting cylinder, Lubrication | |
| | | system, Suction hood, damper, Vibro feeder, weighing hopper, wire| |
| | | feeding system, Electrode nipiling stand, Cranes, hoist, | |
| | | Temperature & sampling tips, ladle stands, ESP, Deducting hoods, | |
| | | Refractories, bag filter, Cranes etc. | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 11 | Continuous | Ladle turret, ladle cover manipulator, Ladle Shroud manipulator, | 50% |
| | casting | tundish car, Continuous tundish temperature measurement system, | |
| | equipment | Tundish stopper rod mechanism, emergency cut-off gate, mould | |
| | | assembly, Nozzle quick change device, mould oscillator and EMS | |
| | | system, Electro-Magnetic braking system, Strand guide segment, | |
| | | Withdrawal & Straightening unit (WSU), Roll gap checker, | |
| | | Emergency torch cutter, Torch cutting machine, Deburrer, Marking | |
| | | machine, Technological control system & process models, Black | |
| | | Refractories, strand gunde segment, tundish, ladle cover, roller | |
| | | tables &auxiliaries, mould& segment maintenance equipments, | |
| | | tundish maintenance equipments, EMBR system | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 12 | Flat product | Large castings and forgings like mill housing, bed plates, work | 50% |
| | mills | rolls, backup rolls, end spindles; roller tables, backup roll and| |
| | | work roll chucks, coilers /tension reels / un coilers, AGC | |
| | | cylinders, shears, levelers, lazer welders, packaging machines, | |
| | | non-contact gauges / profile gauges, anti-friction roll neck | |
| | | bearings, oil film bearings, gear boxes, mill motors | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
| 13 | Long product | Mill housing, bed plates, work rolls, backup rolls, spindles; | 50% |
| | mills | roller tables, coilers/tension reels / uncoilers, shears, billet | |
| | | welder, packaging machines, non-contact gauges / profile gauges, | |
| | | anti-friction roll neck bearings, oil film bearings, finishing | |
| | | blocks, gear boxes, mill motors | |
+-----+--------------------------+------------------------------------------------------------------+---------------------------------+
*Items in appendix B are an indicative list of capital goods for manufacturing steel, the list is not exhaustive.
All capital goods for steel manufacturing shall be considered for purchase preference under the policy with a
minimum domestic value addition requirement of 50%.
Form-1
Format for Affidavit of Self Certification regarding Domestic Value Addition in Iron & Steel
Products/capital goods to be provided on Rs. 100/-Stamp Paper
Date:
I
_________________________ S/o,D/o,W/o,_________________________ Residentof Hereby solemnly affirm and
declare as under:
That I will agree to abide by the terms and conditions of the policy of Government of India issued vide
Notification No:_________________________.
That the information furnished hereinafter is correct to the best of my knowledge and belief and I undertake to
produce relevant records before the procuring agency (ies) for the purpose of assessing the domestic value
addition.
That the domestic value addition for all inputs which constitute the said iron & steel products has been verified
by me and I am responsible for the correctness of the claims made therein.
That in the event of the domestic value addition of the product mentioned herein is found to be incorrect and
not meeting the prescribed value-addition criteria, based on the assessment of procuring agency (ies) for the
purpose of assessing the domestic value-addition, I will be disqualified from any Government tender for a
period of 36 months. In addition, I will bear all costs of such an assessment.
That I have complied with all conditions referred to in the Notification No._________________________
wherein preference to domestically manufactured iron & steel products in Government procurement is
provided and that the procuring agency (ies) is hereby authorized to forfeit and my EMD. I also undertake to
pay the assessment cost and pay all penalties as specified in the tender document.
I agree to maintain the following information in the Company's record for a period of 8 years and shall make
this available for verification to any statutory authority.
i. Name and details of the Bidder (Registered Office, Manufacturing unit location, nature of legal entity)
ii. Date on which this certificate is issued
iii. Iron & Steel Products for which the certificate is produced
iv. Procuring agency to whom the certificate is furnished
v. Percentage of domestic value addition claimed and whether it meets the threshold value of domestic
value addition prescribed
vi. Name and contact details of the unit of the manufacturer(s)
vii. Net Selling Price of the iron & steel products
viii. Freight, insurance and handling till plant
ix. List and total cost value of input steel (imported) used to manufacture the iron & steel products
x. List and total cost of input steel which are domestically sourced.
xi. Please attach domestic value addition certificates from suppliers, if the input is not in house.
xii. For imported input steel, landed cost at Indian port with break-up of CIF value, duties & taxes, port
handling charges and in land freight cost.
For and on behalf of (Name of firm/entity)
Authorized signatory (To be duly authorized by the Board of Directors)
<Insert Name, Designation and Contact No.>
[F. No. 8(2)/2023-ID-I]
SANJAY ROY, Jt. Secy.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054. SARVESH KUMAR Dyed by SEKAR
SRIVASTAVA
SRIVASTAVA
Date: 2025 04.01 22:4